Difference: Nov2019DESYTBlog (1 vs. 13)

Revision 132019-12-08 - AtlasjSilicon

Line: 1 to 1
 
META TOPICPARENT name="Nov2019DESYTestbeam"

Log

Nov 25 ,2019

Line: 52 to 52
  ##run plan##
Changed:
<
<
(1) full depletion voltage is different with vendor and ITk.
>
>
(1) full depletion voltage is different with vendor info and ITk info.
  (2) tune different way:
Line: 108 to 108
  DUT1 changed 130V(10M) -> 100V(5M) -> 80V(5M) -> 30V(5M)
Added:
>
>
so stable beam and DAQ systems.

each batch set is written in detail at ITk Twiki.

sometimes lost correlation.

07 Nov, 2019

maybe midnight the XY stage does not work especially Y direction. in the morning, the problem had been resolved already when I knew the problem.

restart data taking.

08 Nov, 2019

9:00 clean up

config and tunig file in YARR PC is copied at ~/YarrNov in Run Control PC and /eos/atlas/atlascerndisk/pixel-upgrade/itk/TestBeam/desy_2019_november/configlib24. the files do not include *.raw because of no space in Run Control PC.

2 display port - RJ45 adapter were given to Marco. Kyosuke has Linxin's one.

 -- Koji Nakamura - 2019-11-24

Comments

Revision 122019-11-30 - AtlasjSilicon

Line: 1 to 1
 
META TOPICPARENT name="Nov2019DESYTestbeam"

Log

Nov 25 ,2019

Line: 100 to 100
 DUT0 changed 80V -> 100V -> 130V -> 50V -> 10V -> 30V ->130V each with 5M events

DUT1 changed 130V -> 100V -> 80V -> 50V -> 30V -> 10V each with 5M events

Added:
>
>

29 Nov,2019

DUT0(V2S14) and DUT1(V6S05) tuned 1000e no ToT tuning ,Vff=30

DUT0 changed 75V(10M) -> 80V(5M) -> 50V(5M) ->30V(5M)

DUT1 changed 130V(10M) -> 100V(5M) -> 80V(5M) -> 30V(5M)

  -- Koji Nakamura - 2019-11-24

Revision 112019-11-30 - AtlasjSilicon

Line: 1 to 1
 
META TOPICPARENT name="Nov2019DESYTestbeam"

Log

Nov 25 ,2019

Line: 95 to 95
 17:00 changed DUT0 130V and DUT1=129.8V ,1000e, tune V6S02 :DiffVff=50 and V6S04 =50 , No ToT tuning

28 Nov, 2019

Added:
>
>
afternoon :DUT0(V6S02) tuned 1500e ToT and DUT1(V6S04) removed jumpers for grownding

DUT0 changed 80V -> 100V -> 130V -> 50V -> 10V -> 30V ->130V each with 5M events

DUT1 changed 130V -> 100V -> 80V -> 50V -> 30V -> 10V each with 5M events

 -- Koji Nakamura - 2019-11-24

Comments

Revision 102019-11-30 - AtlasjSilicon

Line: 1 to 1
 
META TOPICPARENT name="Nov2019DESYTestbeam"

Log

Nov 25 ,2019

Line: 93 to 93
 16:30 changed DUT0 100V and DUT1=100V -> double peak...

17:00 changed DUT0 130V and DUT1=129.8V ,1000e, tune V6S02 :DiffVff=50 and V6S04 =50 , No ToT tuning

Added:
>
>

28 Nov, 2019

  -- Koji Nakamura - 2019-11-24

Revision 92019-11-27 - AtlasjSilicon

Line: 1 to 1
 
META TOPICPARENT name="Nov2019DESYTestbeam"

Log

Nov 25 ,2019

Line: 82 to 82
  debug 50x50 vendor6 modules, but cannot
Added:
>
>
15:45 tune V6S02 : DiffVff =1 and V6S04 : DiffVff =1 (default Vff=50) , No ToT tuning

16:00 tune V6S02 : DiffVff =30 and V6S04 : DiffVff =30 , No ToT tuning

16:10 tune V6S02 : DiffVff =50 and V6S04 : DiffVff =50 , No ToT tuning-> default Diffvff=50 and tuned Diffvff=50 were not result

16:15 did digital scan for return default , and made new configfile->but not 1500e (in fact near 1650e)

16:30 changed DUT0 100V and DUT1=100V -> double peak...

17:00 changed DUT0 130V and DUT1=129.8V ,1000e, tune V6S02 :DiffVff=50 and V6S04 =50 , No ToT tuning

 -- Koji Nakamura - 2019-11-24

Comments

Revision 82019-11-27 - AtlasjSilicon

Line: 1 to 1
 
META TOPICPARENT name="Nov2019DESYTestbeam"

Log

Nov 25 ,2019

Line: 30 to 30
 the cuurent droped to 0 when apply some modules of vendor2 and vendor6 with connencting to YARR. (when extract display pot cable the problem did not occur)

try to connect PC GND and LV GND, PC GND and HV GND, but the problem did not resolved.

Changed:
<
<
26 Nov
>
>

26 Nov, 2019

  9:00 maybe the promble was due to Single Chip Card?
Line: 45 to 44
  (5) module connect with HV and DisplayPort and LV (ON). HV GND and YARR GND short -> stable 20nA@-80V
Changed:
<
<
jumper connecter whom name HV and GND added which (maybe) select short with HV and sensor, HV and LV. short sensor GND - HV GND - LV GND, and short YARR - LV GND.
>
>
add jumper pin which select short with HV and bias ring. (near HV Lemo connector), and short with HV GND and bias ring.
  --> stable current !!
Line: 75 to 74
  17:00 run start : DUT0:V6S02, DUT1:V6S04, both-130V, 1500e, ToT tuning ON, 10M events
Added:
>
>

27 Nov, 2019

9:00 stack...

10:30 tune modules with -100V, NO ToT tuning. (other parameters are same)

debug 50x50 vendor6 modules, but cannot

 -- Koji Nakamura - 2019-11-24

Comments

Revision 72019-11-26 - AtlasjSilicon

Line: 1 to 1
 
META TOPICPARENT name="Nov2019DESYTestbeam"

Log

Nov 25 ,2019

Line: 73 to 73
  15:30 modify the stage for beam hitting sensor of RD53A as looking the monitor.
Added:
>
>
17:00 run start : DUT0:V6S02, DUT1:V6S04, both-130V, 1500e, ToT tuning ON, 10M events
 -- Koji Nakamura - 2019-11-24

Comments

Revision 62019-11-26 - AtlasjSilicon

Line: 1 to 1
 
META TOPICPARENT name="Nov2019DESYTestbeam"

Log

Nov 25 ,2019

Line: 67 to 67
  11:30 tune V6S04 : same parameters.
Added:
>
>
14:00 run control PC setup especcially editing config files. work DAQ PC from runControlPC.

14:30 first beam out

15:30 modify the stage for beam hitting sensor of RD53A as looking the monitor.

 -- Koji Nakamura - 2019-11-24

Comments

Revision 52019-11-26 - AtlasjSilicon

Line: 1 to 1
 
META TOPICPARENT name="Nov2019DESYTestbeam"

Log

Nov 25 ,2019

Line: 63 to 63
  3. target threshold:1000, ???
Added:
>
>
11:00?? tune V6S02 : first target:2000, second target:1500, injection:10000, ToT:7, including ToT tuning

11:30 tune V6S04 : same parameters.

 -- Koji Nakamura - 2019-11-24

Comments

Revision 42019-11-26 - AtlasjSilicon

Line: 1 to 1
 
META TOPICPARENT name="Nov2019DESYTestbeam"

Log

Nov 25 ,2019

Line: 27 to 27
  apply voltage on V6S03/4, the current is so high (-50V/100uA over)
Added:
>
>
the cuurent droped to 0 when apply some modules of vendor2 and vendor6 with connencting to YARR. (when extract display pot cable the problem did not occur)

try to connect PC GND and LV GND, PC GND and HV GND, but the problem did not resolved.

26 Nov

9:00 maybe the promble was due to Single Chip Card?

(1) module connect with only HV -> stable, 10(?)nA@-80V

(2) module connect with HV and DiplayPort -> unstable:often drop to 0 A

(3) module connect with HV and DisplayPort and LV power supply (ON) -> unstable

(4) module connect with HV and DisplayPort and LV (ON). LV GND and YARR GND short -> unstable

(5) module connect with HV and DisplayPort and LV (ON). HV GND and YARR GND short -> stable 20nA@-80V

jumper connecter whom name HV and GND added which (maybe) select short with HV and sensor, HV and LV. short sensor GND - HV GND - LV GND, and short YARR - LV GND.

--> stable current !!

re-setup

##run plan##

(1) full depletion voltage is different with vendor and ITk.

(2) tune different way:

1.target threshold:1500, include ToT tuning

2.target threshold:1500, NOT including ToT tuning for disappearing living analog core pattern.

3. target threshold:1000, ???

 -- Koji Nakamura - 2019-11-24

Comments

Revision 32019-11-25 - AtlasjSilicon

Line: 1 to 1
 
META TOPICPARENT name="Nov2019DESYTestbeam"

Log

Nov 25 ,2019

Line: 15 to 15
  14:00 setup
Changed:
<
<
(Lingxin modifed a program for yarr memory leak )
>
>
move last TB config file (ex.V2Sxx.json) to Sep2019_2 directory

make new connectivity config file:vendor6.json. and

install V6S04/5. V6S05 is difficult to pass config. so exchange V6S05 to V6S03.

18:00 complete setup and checked digital/analog scan

install new version YarrEudaqProducer modified for memory leak problem. change the symbolic link of YarrEudaqProducerMulti from 201907xx to 20191126

apply voltage on V6S03/4, the current is so high (-50V/100uA over)

  -- Koji Nakamura - 2019-11-24

Comments

Deleted:
<
<
<--/commentPlugin-->
 \ No newline at end of file
Added:
>
>

<--/commentPlugin-->
 \ No newline at end of file

Revision 22019-11-25 - AtlasjSilicon

Line: 1 to 1
 
META TOPICPARENT name="Nov2019DESYTestbeam"

Log

Added:
>
>

Nov 25 ,2019

 
Changed:
<
<
Article text.
>
>
9:30 could not receive DACHS card at bld.6

(Because My name was not in the database.)

10:30 registered my name in the database at bld.6 room 208

11:30 received DACHS card

13:00 safety training(listen and sign name,no test)

14:00 setup

(Lingxin modifed a program for yarr memory leak )

  -- Koji Nakamura - 2019-11-24

Revision 12019-11-24 - KojiNakamura

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="Nov2019DESYTestbeam"

Log

Article text.

-- Koji Nakamura - 2019-11-24

Comments

<--/commentPlugin-->
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback