LatexModePlugin
This LaTeX Mode TWiki Plugin allows you to include LaTeX mark up commands within a TWiki page. It uses external programs (specifically latex, dvipng or dvips-and-convert, or mimetex) to generate
png
or
gif
images from the mark up. These images are then included in the rendered TWiki page. The first time a particular image is generated, there may be a significant lag in page rendering as the images are generated on the server. Once rendered, the image is saved as an attached file for the page, so subsequent viewings will not require re-renders. When you remove a math expression from a page, its image is deleted.
This plugin expands the functionality provided by the
TWiki:Plugins.MathModePlugin.
Syntax Rules
The plugin interprets a number of delimiters to declare LaTeX markup strings. For example, if the LatexModePlugin is successfully installed, the string
\int_{-\infty}^\infty e^{-\alpha x^2} dx = \sqrt{\frac{\pi}{\alpha}}
will render as an image , when enclosed within the defined delimiters.
Standard Syntax
This plugin has two standard modes:
- in-line, declared by %$ $%. Similar to LaTeX's inline math mode, the math markup is rendered on the same line as other text in the string.
- own-line, declared by %\[ \]% or %MATHMODE{ ... }%. These equations will be rendered with center justification on their own line.
For the majority of users, these commands should be sufficient
Example
This is an example of the %BEGINLATEX{inline="1" density="200" gamma="1.0" color="Purple"}%\LaTeX%ENDLATEX% rendering possibilities using the LatexModePlugin.
The singular value decomposition of a matrix is defined as
%BEGINLATEX{label="one" color="Green"}%
\begin{displaymath}
A = U \Sigma V^H
\end{displaymath}
%ENDLATEX%
where and are both matrices with orthonormal columns, indicates a complex-conjugate transpose, and is a diagonal matrix with singular values along the main diagonal. Eq. %REFLATEX{one}% is just one of the many matrix decompositions that exists for matrix .
|
After the plugin has been succesfully installed and configured, this example should render like this:
Extended Syntax
For those that are well familiar with LaTeX, a multi-line syntax allowing more complicated markup commands can be declared using
%BEGINLATEX%
\begin{<environment>}
_latex markup_
\end{<environment>}
%ENDLATEX%
Typically, the declared <environment> will be
displaymath
, although there is no limitation.
Additional options can be included to modify the rendered result. These include
option |
possible values |
default |
description |
inline |
0 or 1 |
0 |
controls inline vs ownline rendering |
label |
alpha-numeric |
--- |
produces a linkable equation number for ownline markup |
density |
positive integer |
116 (set below) |
controls rendered font size |
scale |
positive number |
1.0 (set below) |
sets post-rendered image scaling |
gamma |
positive number |
0.6 (set below) |
controls rendered font darkness |
bgcolor |
--- |
'white' |
sets background color (details below) |
color |
--- |
'black' |
sets foreground font color (details below) |
attachment |
alpha-numeric |
--- |
allows one to couple the latex command with an attached file. Useful for latex graphics commands. |
engine |
{"", "dvipng", "ps", "pdf", "mimetex"} |
"" |
dynamically switch the rendering engine between the installation default (""), dvipng , dvips+convert , pdflatex+convert , or mimetex for LaTeX packages than need it, e.g. tikz. (details below) |
For example, to declare an equation to be numbered by TWiki (not in the LaTeX image) with a larger font size and in red, use the following syntax:
%BEGINLATEX{label="eq1" density="175" color="red"}%
latex markup
%ENDLATEX%
HTML references to LaTeX equations with a defined
<label>
can be generated using %REFLATEX{<label>}%.
Rendering options
Both DENSITY and SCALE alter the rendered image size and quality. For example, if one doubles the DENSITY and halves the SCALE, the rendered image resolution will improve but keep the same image size on the rendered page. (Note: DENSITY * SCALE is the same in both cases)
density = 116, scale = 2.0 : |
%BEGINLATEX{density="116" scale="2.0"}% \[ \mathcal{A } \] %ENDLATEX% |
density = 232, scale = 1.0 : |
%BEGINLATEX{density="232" scale="1.0"}% \[\mathcal{A}\] %ENDLATEX% |
For regular browser viewing, the SCALE parameter sould be set to 1.0. However, one can use these parameters to improve print quality when printing a topic. To do this, increase the DENSITY setting (a value of 300 will give roughly 300dpi) and then set the SCALE setting below 1.0.
Font Color
As of v1.3, one can now directly control the foreground font color in the
rendered mathematics. This is achieved through use of the
color.sty
package in the intermediate latex file.
Latex is able to render colors defined in 3 color spaces:
gray
,
rgb
, and
cmyk
. A limited number of colors are predefined in Latex. These include:
color |
color space |
color space value |
black |
gray |
0 |
white |
gray |
1 |
red |
rgb |
1,0,0 |
green |
rgb |
0,1,0 |
blue |
rgb |
0,0,1 |
cyan |
cmyk |
1,0,0,0 |
magenta |
cmyk |
0,1,0,0 |
yellow |
cmyk |
0,0,1,0 |
For convenience, the following TWiki colors are pre-defined in the
LatexModePlugin
\definecolor{Red}{rgb}{1,0,0}
\definecolor{Blue}{rgb}{0,0,1}
\definecolor{Yellow}{rgb}{1,1,0}
\definecolor{Orange}{rgb}{1,0.4,0}
\definecolor{Pink}{rgb}{1,0,1}
\definecolor{Purple}{rgb}{0.5,0,0.5}
\definecolor{Teal}{rgb}{0,0.5,0.5}
\definecolor{Navy}{rgb}{0,0,0.5}
\definecolor{Aqua}{rgb}{0,1,1}
\definecolor{Lime}{rgb}{0,1,0}
\definecolor{Green}{rgb}{0,0.5,0}
\definecolor{Olive}{rgb}{0.5,0.5,0}
\definecolor{Maroon}{rgb}{0.5,0,0}
\definecolor{Brown}{rgb}{0.6,0.4,0.2}
\definecolor{Black}{gray}{0}
\definecolor{Gray}{gray}{0.5}
\definecolor{Silver}{gray}{0.75}
\definecolor{White}{gray}{1}
To use additional colors, they need to be defined in the Latex preamble, as described in the next section.
Including images in LaTeX markup
v3.0 introduced the ability to include attachments in the latex markup
processing. This is most useful for graphics, e.g.
%BEGINLATEX{attachment="fig1.eps"}%
\includegraphics{fig1.eps}
%ENDLATEX%
It is common practice in LaTeX, however, to
not specify the filename
extension. This is implemented in the Plugin as well, so one could type:
%BEGINLATEX{attachment="fig1"}%
\includegraphics{fig1}
%ENDLATEX%
and the plugin will search for an attachment with extension '.eps',
'.eps.gz', '.pdf', '.png', or '.jpg'. The first extension match will be
used, and the rendering engine that can recognize the attachment will also
be automatically determined. So for the example above, if a file 'fig1.eps'
is attached to the topic, it will be used as the attachment and
dvips+convert will be automatically chosen as the rendering engine.
Switching the rendering on the fly
v3.3 introduced the ability to switch rendering dynamically between
dvipng
,
dvips+convert
, and
pdflatex+convert
. Some latex packages are not supported by the preferred
method
dvipng
, for example
TikZ and PGF. Rather than force
all rendering to use a slower background rendering engine, this switch
allows one to use dvipng rendering as the default, but fall back to 'ps' or
'pdf' intermediate files in certain cases.
If you type:
%BEGINLATEX{ engine="ps"}%
\fbox{
\begin{tikzpicture}[auto,bend right]
\node (a) at (0:1) {$0^\circ$};
\node (b) at (120:1) {$120^\circ$};
\node (c) at (240:1) {$240^\circ$};
\draw (a) to node {1} node [swap] {1'} (b)
(b) to node {2} node [swap] {2'} (c)
(c) to node {3} node [swap] {3'} (a);
\end{tikzpicture}
}
%ENDLATEX%
|
|
It will render as:
|
This enables a wide variety of LaTeX packages to be used within TWiki.
For example: simple image manipulations using the
graphicx
package.
Note that the package must be declared in the LaTeX preamble.
If you type:
%BEGINLATEX{attachment="fig2.png" engine="pdf"}%
\includegraphics[angle=30,scale=0.25]{fig2.png}
%ENDLATEX%
|
|
It will render as:
|
Tables, Figures, and cross-references
To round out the functionality available in standard LaTeX, the automatic generation of Figure and Table reference links is also available. These are declared using
- %BEGINFIGURE{label="fig:label" caption="this is a figure" span="twocolumn"}% ... %ENDFIGURE%, and
- %BEGINTABLE{label="tbl:label" caption="this is a table" span="twocolumn"}% ... %ENDTABLE%.
These commands will create an HTML table with a numbered caption either above (TABLE) or below (FIGURE) the included text. Cross-references to these declared environments can be accessed through %REFLATEX{<label>}%.
To keep the counters/cross-references seperate for each of the three types of references, use
eq:
or
eqn:
,
fig:
, and
tbl:
as the first characters in any declared label.
The
span
option is used only by
TWiki:Plugins.GenPDFLatex, giving the ability to designate the width of a table or figure in two-column styles. (e.g. for Figures, it expands to
\begin{figure*} ... \end{figure*}
.) The default span is one-column.
Sections can be numbered and labeled, for easy cross-referencing. To label
a section, add a %SECLABEL{_label_}% tag after the TWiki section
command. E.g.,
---++ %SECLABEL{sec:intro}% Introduction
Cross-references to the label can be generated using %REFLATEX{sec:intro}%.
To add automatic numbering to the sections, set the following parameter to a
non-zero number. Sections up to this depth will be numbered.
The default setting is '0', which disables the numbering and section labels.
Defining the LaTeX preamble
In LaTeX, the preamble is used to customize the latex processing,
allowing one to add custom styles and declare new commands.
In TWiki, the preamble can be set as either a web or topic preference variable
* #Set PREAMBLE = \usepackage{color} \definecolor{Aqua}{rgb}{0,1,1}
or as a multi-line declaration, using the tags:
%BEGINLATEXPREAMBLE% ... %ENDLATEXPREAMBLE%
One critical difference between the two exists. With the exception of the
color declarations above, the TWiki preference setting will
override the
default settings, and is intended to provide site administrators a central
point to set preamble settings globally. In contrast, the tag declaration
will
add to the preamble defined by either the default settings or the
preference setting, allowing TWiki users to amend the preamble.
Common Symbols
Since the LatexModePlugin is not installed on TWiki.org the above external html reference is given so that you can see what the symbols are. For those who do use Latex in your TWiki install, you can copy the tables formatted for TWiki from the following topics (the symbols won't actually display without the plugin).
What to type to get a variety of symbols using Latex. Due to page loading constraints, the symbols tables are split up into 5 different topics.
Plugin Settings
Plugin settings are stored as preferences variables. To reference
these plugin settings write
%<plugin>_<setting>%
, i.e.
%LATEXMODEPLUGIN_SHORTDESCRIPTION%
- One line description, as shown in the TextFormattingRules topic:
- Set SHORTDESCRIPTION = Enables LaTeX markup (mathematics and more) in TWiki topics
- Debug plugin: (See output in
data/debug.txt
)
- Set the dots-per-inch default density level for the rendered images (116 is suggested for 11pt browser fonts.)
- Set the gamma correction for the rendered images. This controls how dark the rendered text appears
- Set the scaling for the image size. Typically, set to '1'.
- Uncomment the following to define a site-wide custom color, DarkBlue.
- #Set PREAMBLE = \usepackage{color} \definecolor{DarkBlue}{rgb}{0,0.1,0.43}
- In addition, the following parameters are available at the topic level,
EQN
, FIG
, TBL
, to override the counter reset. (i.e. if * Set EQN = 3
is declared in a topic, the first labeled equation will be given the number 4
).
Note: It is recommended to declare these settings in the WikiPreferences or WebPreferences topics, so that they aren't lost when the plugin is upgraded. In this case, the macro declarations should be preceded by
LATEXMODEPLUGIN_
. E.g. to the set the font density default for a specific web, WEB, use:
- Set LATEXMODEPLUGIN_DENSITY = 200
in the topic WEB.WebPreferences.
Plugin Installation Instructions
First, confirm that the external software needed by the plugin is installed on the TWiki server. This includes:
- The
Digest::MD5
and Image::Info
perl modules.
- A mechanism to convert LaTeX markup to images. This is either
- or
Rendering can be performed by (
latex
and
dvipng
) or (
latex
and
dvips
and
convert
) or (
pdflatex
and
convert
) or (
mimetex
). The first
three options allow one to include almost any LaTeX markup in a TWiki
topic, whereas
mimetex
has very limited functionality. Among the first
three options,
dvipng
is the fastest by a significant margin. The
tweakinline
processing (v2.5 and above) to align the baseline of LaTeX
expressions with HTML text uses
convert
.
mimetex
can be used in server environments where a full LaTeX
installation is impractical (e.g.
TWiki:Codev.TWikiOnMemoryStick). mimetex
provides rendering of equations independently of external font files.
This provides a very lightweight and fast mechanism to show equations.
However, the number of colors is limited to 4 (black, red, blue, green)
and only the mathmode and picture LaTeX environments are supported.
Also, the preamble, density, and gamma settings are ignored.
Second,
- Download the
LatexModePlugin.zip
file from the Plugin web
Note: versions 3.0 and above are compatible only with TWiki 4.x.x. If you are running an earlier version of TWiki, (i.e. Cairo) download v2.62 (25 Sep 2006) instead.
- Unzip ZIP file in your twiki installation directory. Content:
File: | Description: |
lib/TWiki/Plugins/LatexModePlugin.pm | Plugin Perl module |
lib/TWiki/Plugins/LatexModePlugin/Init.pm | The initialization module |
lib/TWiki/Plugins/LatexModePlugin/Render.pm | The rendering module |
lib/TWiki/Plugins/LatexModePlugin/CrossRef.pm | The cross-referencing module |
pub/TWiki/LatexModePlugin/expl-v1.4.png | example image of rendered latex | |
pub/TWiki/LatexModePlugin/tikz-expl.png | image for on-the-fly rendering example |
pub/TWiki/LatexModePlugin/rot-expl.png | image for attachment rendering example |
data/TWiki/LatexModePlugin.txt | Plugin topic and documentation | |
data/TWiki/LatexSymbols.txt | Comprehensive list of available LaTeX symbols (1 of 5) |
data/TWiki/LatexSymbols2.txt | Comprehensive list of available LaTeX symbols (2 of 5) |
data/TWiki/LatexSymbols3.txt | Comprehensive list of available LaTeX symbols (3 of 5) |
data/TWiki/LatexSymbols4.txt | Comprehensive list of available LaTeX symbols (4 of 5) |
data/TWiki/LatexSymbols5.txt | Comprehensive list of available LaTeX symbols (5 of 5) |
data/TWiki/LatexIntro.txt | A basic description of LaTeX markup conventions |
Finally, customize the installation specific variables.
- Set the local disk paths for the rendering methods employed. This can be done by copying the needed lines from the following list to
lib/LocalSite.cfg
or lib/TWiki.cfg
.
- $TWiki::cfg{Plugins}{LatexModePlugin}{latex} = '/usr/bin/latex';
- $TWiki::cfg{Plugins}{LatexModePlugin}{pdflatex} = '/usr/bin/pdflatex';
- $TWiki::cfg{Plugins}{LatexModePlugin}{dvips} = '/usr/bin/dvips';
- $TWiki::cfg{Plugins}{LatexModePlugin}{dvipng} = '/usr/bin/dvipng';
- $TWiki::cfg{Plugins}{LatexModePlugin}{convert} = '/usr/X11R6/bin/convert';
- $TWiki::cfg{Plugins}{LatexModePlugin}{mimetex} = '/usr/bin/mimetex';
- Modify the following if needed.
- $TWiki::cfg{Plugins}{LatexModePlugin}{donotrenderlist}
declare a comma-separated list of LaTeX commands that will not be rendered.
Default = 'input,include,catcode'
.
- $TWiki::cfg{Plugins}{LatexModePlugin}{tweakinline}
Turned off by default, if this variable is set to 1
the plugin will attempt to align the baseline of the rendered in-line math with the baseline of the HTML text.
- $TWiki::cfg{Plugins}{LatexModePlugin}{bypassattach}
Turned off by default, setting this boolean variable to 1
will force file creation to use direct file stores and bypass the saveAttach mechanism in TWiki4. Saves a bit of processing overhead.
- $TWiki::cfg{Plugins}{LatexModePlugin}{engine}
This sets the default rendering engine
Default: 'dvipng'
- $TWiki::cfg{Plugins}{LatexModePlugin}{imagetype}
This sets the image format for the generated files. Valid types are png and gif.
Default: 'png'
Security
Aside from providing beautiful rendering of mathematics, LaTeX is
fundamentally a programming language. Before installation of this plugin,
one should consider the implications of exposing access to a programming
language on a web server. TWiki's use of access control can mitigate some
of the risk, by limiting access to trusted users. Complementary to this
approach, one can prevent certain commands from being rendered using the
{donotrenderlist}
configuration setting.
To start, before installing the Plugin, one should modify the
texmf.cnf
file on the sever to the following variables:
shell_escape = f
openout_any = p
openin_any = p % note this won't work on Windows
Next, one should declare the
donotrenderlist
. At a minimum, the LaTeX
commands of
input
,
include
, and
catcode
should be in the list. On
publicly editable wiki's, the commands
newcommand
and
def
should be
added as well.
newenvironment
,
newfont
,
newtheorem
, and
newsavebox
should be considered as well.
Finally, one should set a limit on the length of time allowed for
latex
to
finish its processing. This can be done in Apache via
RLimit settings.
More Details
Version control is not specifically used for the image files. Because the images are generated from the raw text, the topic history includes all the versions of the markup for the expressions, and can be re-rendered when you view a different version.
This plugin is an enhanced version of the
TWiki:Plugins.MathModePlugin maintained by
TWiki:Main.MichaelDaum. There are a number of significant differences:
Additional Resources (external)
Plugin Info
Plugin Author: |
TWiki:Main.ScottHoge |
Plugin Version: |
02 Dec 2007 (v 3.72, SVN:16926 (12 Dec 2008)) |
Change History: |
v3.0 and above requires TWiki 4.x.x and above |
02 Dec 2007 (v 3.72) |
more bug fixes: sync doc to code, fixed trimline v2 for ps engine |
15 Nov 2007 (v 3.71) |
minor bug fixes: DEFAULTENGINE, doc changes, improved the 'stale time' in delete-image-check |
-- Apr 2007 (v 3.62) |
added -halt-on-error for better error handling. Fixed debug variable in Init.pm |
12 Mar 2007 (v 3.6) |
New option, imagetype, to set png or gif rendering from LocalSite.cfg |
2 Feb 2007 (unreleased) |
Modified the section labeling to be more compatible with genpdflatex , minor cleanup of html markup, new inline processing available (set tweakinline equal to '2' to enable) |
30 Dec 2006 (v 3.51) |
fixed call to attachmentExists in Render.pm, corrected version number |
30 Dec 2006 (v 3.5) |
modified how rendering of math from included topics is handled. Fixed mimetex inline processing |
27 Dec 2006 (v 3.4) |
added mimetex to the rendering engine list |
27 Nov 2006 (v 3.35) |
improved dynamic rendering engine to auto-select on graphics files |
17 Nov 2006 (v 3.3) |
added dynamic switching of rendering engine, more Parse bug fixes |
06 Oct 2006 (v 3.2) |
more bugs fixed: bgcolor option was missing from v3.0; verbatim mode fixed in Parse |
04 Oct 2006 (v 3.1) |
fixed two bugs: populating files to check under Dakar, and itemize env parsing in Parse |
30 Sep 2006 (v 3.0) |
Significant rewrite of module, including: section numbering/cross-links and mod_perl compatibility. |
25 Sep 2006 (v 2.62) |
fixed handleFloat to allow TWiki markup tags in captions. |
8 Aug 2006 (v 2.61) |
fixed INCLUDE-not-rendering bug introduced in v2.6. Aded bgcolor option. Split symbol list into 5 topics. |
5 Aug 2006 (v 2.6) |
added security description and expanded default donotrenderlist . Reworked plugin init to reduce overhead when not in use. Added bypassattach option. Sandbox now used in place of system calls. |
19 May 2006 (v 2.51) |
bug fix: rerender hook block of mailnotify corrected |
14 Mar 2006 (v 2.5) |
added rerender hook, fixed '> in alt field' bug. |
21 Feb 2006 (v 2.4) |
introduced donotrenderlist to patch a critical security hole. Bug fixes include: disabling WikiWord link rendering in alt fields of img tags; improved in-line rendering alignment available; |
1 Feb 2006 (v 2.3) |
minor bug fixes: $pathSep changes, now uses &TWiki::Func::extractParameters(), improved efficiency and inline rendering |
11 Nov 2005 (v 2.2) |
more mods for TWiki:Plugins.GenPDFLatexAddOn: protect newlines, moved float handler, moved float label checker |
15 Oct 2005 (v 2.1) |
minor modifications for TWiki:Plugins.GenPDFLatexAddOn support |
unreleased (v 2.0) |
Major rewrite for Dakar |
30 Sep 2005 (v 1.41) |
relaxed the scrubing a little bit... previous version caused problems with REFLATEX |
29 Sep 2005 (v 1.4) |
more robust scrubing of convert input parameters. errors on save now reported. |
5 Sep 2005 (v 1.3) |
added image scale parameter, color rendering, and preamble hooks |
22 Aug 2005 (v 1.2) |
Forked from the TWiki:Plugins.MathModePlugin by TWiki:Main.GraemeLufkin |
TWiki Dependency: |
$TWiki::Plugins::VERSION 1.025, TWiki:Plugins.DakarContrib |
CPAN Dependencies: |
CPAN:Digest::MD5, CPAN:File::Basename, CPAN:Image::Info |
Other Dependencies: |
A working installation of latex . A working installation of convert or dvipng . |
Perl Version: |
5.8.0 |
License: |
GPL (GNU General Public License) |
TWiki:Plugins/Benchmark: |
GoodStyle 100%, FormattedSearch 100%, LatexModePlugin 100% |
Plugin Home: |
http://TWiki.org/cgi-bin/view/Plugins/LatexModePlugin |
Feedback: |
http://TWiki.org/cgi-bin/view/Plugins/LatexModePluginDev |
Appraisal: |
http://TWiki.org/cgi-bin/view/Plugins/LatexModePluginAppraisal |
This plugin was created and tested on the 02 Sep 2004 version of TWiki, using ImageMagick v5.5.7, EPS GhostScript v7.05, and tetex v2.02. It has been reported to work (Thanks Jos!) using
ImageMagick 6.2.3, tetex 3.0 and ghostscript 8.51 as well.
Related Topics: TWikiPreferences,
TWikiPlugins,
TWiki:Plugins.MathModePlugin