RD53ADAQtop < Main

---+ !RD53A DAQ

<br />%TOC%
---++ Memo & Log
   * icon:index RD53ADAQdevelopment : FE-I4 DAQ development by KC705 & preparation of !RD53A daq
   * icon:index RD53AProbeCard : !RD53A Probe card development for ASIC and Module testing
   * icon:index RD53AtestAtLBL : Random memo at LBL
   * icon:index RD53AStartUpHowTo : !RD53A &#x3092;&#x52D5;&#x304B;&#x3059;&#x969B;&#x306E;&#x6700;&#x521D;&#x306E;&#x6E96;&#x5099;
   * icon:index [[SCCchanges]] : Single Chip Card&#x306B;&#x5B9F;&#x88C5;&#x3055;&#x308C;&#x3066;&#x3044;&#x308B;&#x62B5;&#x6297;&#x7B49;&#x306E;&#x5909;&#x66F4;&#x70B9;
   * icon:index RD53Achipdatabase : !RD53A&#x306E;LV&#x30AB;&#x30EC;&#x30F3;&#x30C8;&#x3068;&#x30EC;&#x30AE;&#x30E5;&#x30EC;&#x30FC;&#x30BF;&#x96FB;&#x5727;
   * icon:index RD53Alog : log&#x7B49;&#x306E;&#x96D1;&#x8A18;
   * icon:index Bdaq53HowTo : How to use bdaq53 (Bonn's rd53a daq system)
   * icon:index XpressK7USBc: USB-c readout
   * icon:index RD53ATravelingModule : temp log book for traveling module
   * icon:index RD53ADAQAtatlaspc14 : atlaspc14 !RD53A daq log page
   * icon:index RD53ADAQdevel : attach board&#x3067;&#x306E;trigger&#x53D7;&#x3051;&#x53D6;&#x308A;&#x7B49;
   * icon:index SelfTriggerScan : VcalTestUsing55Fe &#x306A;&#x3069;&#x306E;self trigger scan&#x306E;&#x65B9;&#x6CD5; (2020.08.18&#x73FE;&#x5728;)
   * icon:index ExtTriggerScanFNAL: &#x5916;&#x90E8;&#x30B7;&#x30F3;&#x30C1;&#x30EC;&#x30FC;&#x30BF;&#x3092;&#x4F7F;&#x3063;&#x305F;external trigger scan&#x306E;&#x65B9;&#x6CD5; (2020.08.18&#x73FE;&#x5728;)
   * icon:index RD53ARealQuadDAQ : General information and log for Real Quad module DAQ
---++ Useful links
   * icon:index https://twiki.cern.ch/twiki/bin/viewauth/RD53/RD53ATesting
   * icon:index https://twiki.cern.ch/twiki/bin/view/Main/TimonHeim?forceShow=1
   * icon:index https://twiki.cern.ch/twiki/bin/viewauth/RD53/RD53AInventory : All chips must be tracked in here
   * icon:index http://dbiswas.web.cern.ch/dbiswas/cgi-bin/mysite.fcgi/rd53a-chip/loc?id=KEK : rd53a chip database
   * icon:index https://gitlab.cern.ch/YARR/YARR/-/blob/master/docs/scanconsole.md : About YARR scanConsole (2020.08.18&#x73FE;&#x5728;)
   * icon:index https://gitlab.cern.ch/YARR/YARR/-/blob/master/docs/rd53a.md : About YARR each scan (digital, analog, threshold, cross-talk, trigger, etc.) (2020.08.18&#x73FE;&#x5728;)
---++ Preparation
---+++++ Firmware

Firmware&#x306E;version&#x304C;&#x53E4;&#x3044;&#x5834;&#x5408;&#xFF0C;&#x65B0;&#x3057;&#x3044;version&#x3092;&#x3082;&#x3063;&#x3066;&#x304F;&#x308B;&#xFF0E;
   * =$ git clone https://gitlab.cern.ch/YARR/YARR-FW.git YARR-FW-20yymmdd=
   * 20yymmdd&#xFF1A;download&#x3057;&#x305F;&#x65E5;&#x4ED8;
Firmware&#x3092;Xpressk7&#x306B;flash&#x3059;&#x308B;&#xFF0E;
   * &#xFF08;Ohio card&#x306E;&#x305D;&#x308C;&#x305E;&#x308C;&#x306E;Port&#x306B;&#x8F09;&#x3063;&#x3066;&#x3044;&#x308B;&#x30D1;&#x30FC;&#x30C4;&#x304C;AC or DC&#x304B;&#x78BA;&#x8A8D;&#x3059;&#x308B;&#xFF09;
   * JTAG&#x3092;Xpressk7&#x3068;PC&#x306E;USB&#x30DD;&#x30FC;&#x30C8;&#x306B;&#x63A5;&#x7D9A;&#xFF0E;
   * =$ source /opt/Xilinx/Vivado/2019.02/setting64.sh=
   * =$ cd YARR-FW-20yymmdd/scripts=
   * =$ ./flash.sh= or =$ python flash.py=
      * flash.sh&#x306E;&#x5834;&#x5408;&#x306F;&#xFF0C;&#x8A72;&#x5F53;&#x3059;&#x308B;bit file&#x3092;strage&#x304B;&#x3089;install&#x3059;&#x308B;&#xFF0E;old version&#x3084;FNAL version&#x306A;&#x3069;&#x306F;&#x306A;&#x3044;&#xFF0E;
      * flash.py&#x306E;&#x5834;&#x5408;&#x306F;&#xFF0C;YARR-FW-20yymmdd&#x4E0B;&#x306B;&#x3042;&#x308B;bit file&#x304B;&#x3089;&#x9078;&#x3076;&#x3053;&#x3068;&#x304C;&#x3067;&#x304D;&#x308B;&#xFF0E;&#x3088;&#x304F;&#xFF0C;syn/xpressk7&#x4E0B;&#x306B;&#x7F6E;&#x3044;&#x305F;&#x308A;&#x3059;&#x308B;&#xFF08;&#xFF1F;&#xFF09;
   * &#x57FA;&#x672C;&#x7684;&#x306B;&#x4EE5;&#x4E0B;&#x306E;version&#x3092;&#x9078;&#x629E;&#x3059;&#x308B;&#xFF0E;
      * Xpressk7_325 &#xFF08;&#x73FE;&#x5728;&#x6301;&#x3063;&#x3066;&#x3044;&#x308B;Xpressk7&#x306E;version&#x304C;325&#x3068;&#x3044;&#x3046;&#x3082;&#x306E;&#x3089;&#x3057;&#x3044;&#xFF09;
      * Ohio card
      * 160Mbps
      * 4x4 (data line&#x6570;&#xFF09;&#xFF08;FNAL&#x306E;&#x3088;&#x3046;&#x306B;1&#x3064;trigger&#x7528;=DC&#x3060;&#x3068;3x4&#xFF09;
   * &#x554F;&#x984C;&#x306A;&#x304F;&#x713C;&#x304D;&#x7D42;&#x3048;&#x305F;&#x3089;reboot&#xFF0E;&#xFF08;&#x713C;&#x304F;&#x306E;&#x306B;&#x3060;&#x3044;&#x305F;&#x3044;10&#x5206;&#x304F;&#x3089;&#x3044;&#x304B;&#x304B;&#x308B;&#xFF09;
---+++++ Check Communication with XpressK7

Software&#x304C;&#x53E4;&#x3044;&#x5834;&#x5408;&#xFF0C;&#x65B0;&#x3057;&#x3044;version&#x306E;&#x3092;&#x6301;&#x3063;&#x3066;&#x304F;&#x308B;&#xFF0E;
   * =$ git clone [[https://gitlab.cern.ch/YARR/YARR-FW][https://gitlab.cern.ch/YARR/YARR]].git YARR-20yymmdd=
   * =$ cd YARR-20yymmdd=
   * =$ cmake -j4 (?)=
RD53&#x306B;config&#x3092;&#x901A;&#x3059;&#x524D;&#x306B;&#xFF0C;Xpressk7&#x3068;PCIe communication&#x3067;&#x304D;&#x3066;&#x3044;&#x308B;&#x304B;&#x78BA;&#x8A8D;&#x3059;&#x308B;&#xFF0E;
   * =$ cd YARR-20yymmdd=
   * =$ ./bin/specBenchmarkDma=
---+++++ Config File

scan&#x3092;&#x3059;&#x308B;&#x969B;&#x306B;controller config&#x3084;connectivity config, scan config&#x3092;&#x6307;&#x5B9A;&#x3059;&#x308B;&#x5FC5;&#x8981;&#x304C;&#x3042;&#x308B;&#xFF0E;

connectivity config
   * Xpressk7 (Ohio card)&#x306E;&#x3069;&#x306E;port&#x3092;&#x4F7F;&#x3044;&#xFF0C;&#x3069;&#x306E;chip config file&#x3092;&#x4F7F;&#x3046;&#x304B;&#x3092;&#x6307;&#x5B9A;&#xFF0E;
   * "config": &#x4F7F;&#x7528;&#x3059;&#x308B;chip config file. &#x5B58;&#x5728;&#x3057;&#x306A;&#x3044;&#x5834;&#x5408;&#x306F;&#x81EA;&#x52D5;&#x7684;&#x306B;default&#x306E;&#x304C;&#x4F5C;&#x3089;&#x308C;&#x308B;&#xFF0E;
   * "tx": talk channel. (0,1,2,3)=port(A,B,C,D)
   * "rx": read channel. (0,1,2,3)=port(A,B,C,D)
   * "enable": &#x4F7F;&#x7528;&#x3059;&#x308B;&#x304B;&#x5426;&#x304B;&#xFF0E;0 or 1
   * "locked": chip config file&#x306E;&#x66F8;&#x304D;&#x63DB;&#x3048;&#x306E;&#x6709;&#x52B9;&#x5316;&#xFF0E;0 or 1
scan config
   * &#x57FA;&#x672C;&#x7684;&#x306B;&#x3044;&#x3058;&#x308B;&#x5FC5;&#x8981;&#x306F;&#x306A;&#x3044;&#x304C;&#xFF0C;&#x4EE5;&#x4E0B;&#x306B;&#x8A73;&#x3057;&#x304F;&#x66F8;&#x3044;&#x3066;&#x3044;&#x308B;&#xFF0E;
   * https://gitlab.cern.ch/YARR/YARR/-/blob/master/docs/scanconsole.md
   * https://gitlab.cern.ch/YARR/YARR/-/blob/master/docs/rd53a.md
<span style="background-color: transparent;"> chip config &#xFF08;&#x4E3B;&#x8981;&#x306A;&#x3082;&#x306E;&#x3060;&#x3051;&#x8AAC;&#x660E;&#xFF09;</span>
   * EnCoreCol [Diff1,2/Lin1,2/Sync]: Front End&#x3054;&#x3068;&#x306B;&#x30DE;&#x30B9;&#x30AF;&#x3059;&#x308B;&#x306A;&#x3089;&#xFF0C;65535-&gt;0, 1-&gt;0&#x306B;&#x3059;&#x308B;&#xFF0E;
   * DiffLcc (En): Leakage Current Compensation bias (En: 1 is enable)
   * Sldo[Analog/Digital]Trim: analog or digital regulator output voltage trim.
      * RD53A &#x3068;&#x306E;communication&#x3067;invalid data&#x3092;&#x53D7;&#x3051;&#x53D6;&#x308B;&#x5834;&#x5408;&#xFF0C;&#x3053;&#x306E;&#x6570;&#x5024;&#x3092;&#x5909;&#x3048;&#x308B;&#x3068;&#x89E3;&#x6C7A;&#x3059;&#x308B;&#x5834;&#x5408;&#x304C;&#x3042;&#x308B;&#xFF0E;(22-&gt;19&#x3068;&#x304B;&#xFF09;
   * Name: scan&#x7D50;&#x679C;&#x306E;&#x30C7;&#x30FC;&#x30BF;&#x3084;histogram&#x306E;&#x540D;&#x79F0;&#xFF0E;
-- %USERSIG{KatsuyaSato - 2020-08-19}%
---++ Configure Chip and Run Scan, Tune

<span style="background-color: transparent;">&#x53C2;&#x7167;&#xFF1A;https://gitlab.cern.ch/YARR/YARR/-/blob/master/docs/rd53a.md</span>

&#x57FA;&#x672C;&#x7684;&#x306B;scan&#x3092;&#x3059;&#x308B;&#x969B;&#x306F;&#xFF0C;

=$ ./bin/scanConsole -r configs/controller/specCfg.json -c configs/connectivity/CONNECTIVITY.json -s configs/scans/rd53a/SCAN.json [OPTION]=

[OPTION]
   * -p: histogram plotting enable
   * -m 0: No change masks
   * -m 1: reset masks
   * (no add -m: add masks)
---+++++ Digital / Analog Scan

=$./bin/scanConsole -r configs/controller/specCfg.json -c configs/connectivity/example_rd53a_setup.json -s configs/scans/rd53a/std_digitalscan.json -p=

=$ ./bin/scanConsole -r configs/controller/specCfg.json -c configs/connectivity/example_rd53a_setup.json -s configs/scans/rd53a/std_analogscan.json -p=
---+++++ Threshold Scan

=$ ./bin/scanConsole -r configs/controller/specCfg.json -c configs/connectivity/example_rd53a_setup.json -s configs/scans/rd53a/std_thresholdscan.json -p=

Range
   * default&#x3067;&#x306F;&#xFF0C;Vcal:50-300 i.e. 500e-3000e&#x3057;&#x304B;&#x6E2C;&#x308C;&#x306A;&#x3044;&#xFF0E;
   * scans/rd53a/std_thresholdscan.json&#x306E;&#x4E2D;&#x306E;"parameter":"InjVcalDiff"&#x306E;max,min&#x3092;&#x5909;&#x66F4;&#x3059;&#x308C;&#x3070;&#x3088;&#x3044;&#xFF0E;
   * inject charge [e]~Vcal*10
&#x3061;&#x306A;&#x307F;&#x306B;&#xFF0C;analog/digital scan&#x3067;&#x306F;100&#x767A;inject&#x3057;&#x3066;&#x3044;&#x308B;&#x304C;&#xFF0C;threshold scan&#x306E;&#x5834;&#x5408;&#x306F;50&#x767A;
---+++++ ToT (Time over Threshold) Scan

=$ ./bin/scanConsole -r configs/controller/specCfg.json -c configs/connectivity/example_rd53a_setup.json -s configs/scans/rd53a/std_thresholdscan.json -p -t [CHARGE] [Target ToT ]=

ToT Scan&#x3092;&#x3059;&#x308B;&#x969B;&#x306F;inject charge=MIP&#x304C;&#x843D;&#x3068;&#x3059;charge~10k[e]&#x3092;&#x5165;&#x529B;&#x3059;&#x308B;&#xFF0E;&#xFF08;1um silicon&#x306B;&#x5BFE;&#x3057;&#x3066;&#x304A;&#x3088;&#x305D;80electrons&#xFF09;
---+++++ Tune

Tunig&#x306F;scripts&#x304C;&#x7528;&#x610F;&#x3055;&#x308C;&#x3066;&#x3044;&#x308B;&#xFF0E;&#xFF08;&#x8A73;&#x3057;&#x304F;&#x306F;&#x4E2D;&#x3092;&#x898B;&#x3066;&#x307B;&#x3057;&#x3044;&#xFF09;&#x3053;&#x308C;&#x306B;&#x306F;&#x5F15;&#x6570;&#x304C;&#x5FC5;&#x8981;&#x3067;&#xFF0C;

=$ ./scripts/tune-rd53a.sh [1st Target Threshold] [2nd Target Threshold] [Inject Charge] [Target ToT ] configs/controller/specCfg.json configs/connectivity/example_rd53a_setup.json=
   * [1st Target Threshold]: Linear Front End&#x3092;tuning&#x3059;&#x308B;&#x969B;&#x306B;&#x4F7F;&#x308F;&#x308C;&#x308B;&#xFF0E;final targer threshold&#x304C;1500e&#x306E;&#x5834;&#x5408;&#x306F;&#xFF0C;[1st Target Threshold]=2000&#x3068;&#x304B;&#xFF1F;
   * [2nd Targer Threshold]: final target threshold.
   * [Inject Charge]: 10000 (10k[e])
   * [Targer ToT ]: 7 or 8 [b.c]&#x3068;&#x304B;&#xFF0E;&#xFF08;final threshold&#x3068;&#x95A2;&#x4FC2;&#x3059;&#x308B;&#xFF09;
   * controller config&#x3084;connectivity config&#x306E;&#x524D;&#x306B;"-r"&#x3084;"-c"&#x306F;&#x4E0D;&#x8981;&#xFF0E;
Sync F.E.&#x3084;Linear F.E.&#x4F7F;&#x308F;&#x306A;&#x3044;&#x5834;&#x5408;&#x306F;&#xFF0C;shell script&#x306E;&#x4E2D;&#x8EAB;&#x3092;comment out&#x3059;&#x308C;&#x3070;&#x6642;&#x9593;&#x77ED;&#x7E2E;&#x306B;&#x306A;&#x308B;&#xFF0E;&#x3060;&#x3044;&#x305F;&#x3044;10&#x5206;&#x304F;&#x3089;&#x3044;&#x304B;&#x304B;&#x308B;&#xFF1F;
---+++++ Cross-Talk Scan

=$ ./bin/scanConsole -r configs/controller/specCfg.json -c configs/connectivity/example_rd53a_setup.json -s configs/scans/rd53a/std_crosstalk_scan.json -p=

Inject Pattern
   * scan config&#x306E;&#x4E2D;&#x306E;"maskSize"
   * readout pixel (center)&#x306B;&#x5BFE;&#x3057;&#x3066;&#x4E0A;&#x4E0B;&#x5DE6;&#x53F3;&#x3069;&#x306E;pixel&#x306B;charge&#x3092;inject (max:40ke)&#x3059;&#x308B;&#x304B;&#x6307;&#x5B9A;&#x3059;&#x308B;&#xFF0E;
   * maskSize=(0,1,2,3,4,5,6,7,8,9,10,11)
Mask Stage
   * default&#x3060;&#x3068;&#x5168;&#x3066;&#x306E;pixel&#x3092;&#x8AAD;&#x3093;&#x3067;&#x304F;&#x308C;&#x308B;&#x308F;&#x3051;&#x3067;&#x306F;&#x306A;&#x3044;&#xFF0E;analog scan&#x306E;&#x3088;&#x3046;&#x306B;&#x3059;&#x3079;&#x3066;&#x306E;pixel&#x3092;&#x8AAD;&#x307F;&#x8FBC;&#x3080;&#x305F;&#x3081;&#x306B;&#x306F;&#xFF0C;
   * "loopAction": "Rd53aMaskLoop"&#x306E;&#x4E2D;&#x306E;"max":1536-&gt;64&#x306B;&#x5909;&#x66F4;&#x3059;&#x308C;&#x3070;&#x3088;&#x3044;&#xFF0E;
   * "loopAction": "Rd53aCoreColLoop"&#x306E;&#x4E2D;&#x306E;"nSteps"&#x306F;1&#x3067;&#x3082;&#x554F;&#x984C;&#x306A;&#x304F;&#x52D5;&#x304F;&#xFF0E;&#xFF08;analogscan&#x306F;5&#x3067;&#xFF0C;&#x3053;&#x308C;&#x306B;&#x3059;&#x308B;&#x3068;&#x3068;&#x3066;&#x3082;&#x6642;&#x9593;&#x304C;&#x304B;&#x304B;&#x308B;&#xFF09;
---+++++ Source Scan

&#x53C2;&#x7167;&#xFF1A; SelfTriggerScan

&#x53C2;&#x7167;&#xFF1A; ExtTriggerScanFNAL

Scan&#x5F8C;&#x306B;.raw data&#x3092;&#x4F5C;&#x6210;&#x3055;&#x305B;&#x308B;&#x306B;&#x306F;&#xFF0C;scan config&#x306B;"algorithm": "DataArchiver"&#x306E;&#x9805;&#x3092;&#x8FFD;&#x52A0;&#x3059;&#x308B;&#x5FC5;&#x8981;&#x304C;&#x3042;&#x308B;&#xFF0E;

&#xFF08;.raw data&#x3092;&#x89E3;&#x6790;&#x3059;&#x308B;&#x306E;&#x306F;&#xFF0C;plotting/read_rawData or bin/analyseRawData&#x3092;&#x4F7F;&#x3048;&#x3070;&#x3088;&#x3044;&#xFF09;

-- %USERSIG{KatsuyaSato - 2020-08-19}%
---++ Etc. &#x5099;&#x5FD8;&#x9332;

YARR/bin &#x306B;&#x5165;&#x3063;&#x3066;&#x3044;&#x308B;&#x89E3;&#x6790;scripts&#x3092;&#x7DE8;&#x96C6;&#x3059;&#x308B;&#x969B;&#x306E;&#x624B;&#x9806;&#xFF0E;
   * &#x3053;&#x306E;binary file&#x306F; YARR/src/tools &#x4E0B;&#x306B;&#x5165;&#x3063;&#x3066;&#x3044;&#x308B;C++&#x3092;compile&#x3059;&#x308B;&#x3053;&#x3068;&#x3067;&#x5F97;&#x3089;&#x308C;&#x305F;&#x3082;&#x306E;&#xFF0E;&#x3084;&#x308A;&#x305F;&#x3044;&#x89E3;&#x6790;&#x306A;&#x3069;&#x304C;&#x3042;&#x308B;&#x5834;&#x5408;&#x306F;&#x3053;&#x3053;&#x3092;&#x3044;&#x3058;&#x308B;&#xFF0E;
   * =$ cd YARR/build=
   * =$ source /opt/rh/devtoolset-7/enable= (cmake&#x306E;version&#x3092;&#x5909;&#x66F4;)
   * =$ cmake ../=
   * =$ make= (compile&#x3055;&#x308C;&#x305F;binary file&#x306F;&#xFF0C;YARR/build/bin&#x4E0B;&#x306B;&#x5165;&#x308B;)
   * =$ make install= (YARR/bin&#x306B;&#x53CD;&#x6620;)
---+++++ Digital/Analog Power &#xFF08;LV)

RD53A Single Chip Card&#x306B;&#x306F;&#xFF0C;digital/analog power&#x3092;direct&#x3067;&#x4E0E;&#x3048;&#x308B;&#x304B;regulator&#x3092;&#x901A;&#x3057;&#x3066;&#x4E0E;&#x3048;&#x308B;(regulator mode)&#x304B;&#x306E;2&#x901A;&#x308A;&#x3042;&#x308B;&#xFF0E;

Regulator Mode
   * RD53A SCC&#x306E;jumper pin&#x3067;&#xFF0C;VINA&#x3068;VIND&#x3092;&#x9078;&#x3076;&#xFF0E;
   * LV&#x306F;&#x57FA;&#x672C;&#x7684;&#x306B;&#x306F;1.8V&#x5370;&#x52A0; (4pin MOLEX&#x306E;connect&#x90E8;&#x5206;&#x3092;&#x6B63;&#x9762;&#x306B;&#x3057;&#x3066;&#xFF0C;&#x4E0A;&#x5074;&#x304C;hot&#x3067;&#x4E0B;&#x5074;&#x304C;GND&#xFF0C;&#x5DE6;&#x5074;&#x304C;analog&#x3067;&#x53F3;&#x5074;&#x304C;digital)
   * jumper pin&#x306E;&#x5148;&#x3068;GND&#x3067;&#x306E;&#x96FB;&#x4F4D;&#x5DEE;&#x304C;1.2V&#x7A0B;&#x5EA6;&#x306A;&#x3089;&#x554F;&#x984C;&#x306A;&#x3057;&#xFF0E;
Direct Mode
   * RD53A SCC&#x306E;jumper pin&#x3067;&#x306F;&#xFF0C;VDDA&#x3068;VDDD&#x3092;&#x9078;&#x3076;&#xFF0E;
   * LV&#x306F;&#x57FA;&#x672C;&#x7684;&#x306B;1.2V&#x5370;&#x52A0;
---+++++ Firmware?

160Mbps/640Mbps&#x306E;Firmware&#x3092;&#x4F7F;&#x3046;&#x5834;&#x5408;&#xFF0C;config file&#x306E;parameter&#x3092;&#x5909;&#x66F4;&#x3059;&#x308B;&#x5FC5;&#x8981;&#x304C;&#x3042;&#x308B;&#xFF0E;

160Mbps -&gt; CdrSelSerClk=3

640Mbps -&gt; CdsSelSerClk=0
---++ #OLD# preparation
   * source /opt/Xilinx/Vivado/2016.4/settings64.sh&#x3092;&#x3057;&#x3066;&#x3001;vivado&#x3067;Vivado&#x3092;&#x8D77;&#x52D5;
   * Open Hardware Maneger&#x306B;&#x5165;&#x308A;&#x3001;Open target&#x306E;Auto connect&#x3092;&#x30AF;&#x30EA;&#x30C3;&#x30AF;
   * xcf7k325t_1&#x3092;&#x53F3;&#x30AF;&#x30EA;&#x30C3;&#x30AF;&#x3057;&#x3001;Program Device&#x3092;&#x3059;&#x308B;
   * ~/work/FNALTestbeam2018/XpressK7_RD53A/YARR-FW/syn/xpressk7/bram_rd53a_quad_lbnl-325&#x5185;&#x306E;rd53a_quad_lbnl_passive_325_160Mbps_pixregro.bit&#x3092;&#x713C;&#x3044;&#x3066;PC&#x3092;reboot
   * src&#x5185;&#x3067;"./bin/test"&#x3092;&#x5B9F;&#x884C;&#x3057;&#x3066;&#x6B63;&#x5E38;&#x306B;&#x52D5;&#x304F;&#x304B;&#x3092;&#x78BA;&#x8A8D;
vivado &#x3092;source &#x3057;&#x305F;&#x5F8C;&#x306B;python flash.py &#x3092;&#x3059;&#x308B;&#x3068;bit&#x30D5;&#x30A1;&#x30A4;&#x30EB;&#x306E;&#x30EA;&#x30B9;&#x30C8;&#x304C;&#x8868;&#x793A;&#x3055;&#x308C;&#x308B;&#x306E;&#x3067;&#x3001;&#x3053;&#x3053;&#x3067;&#x30D5;&#x30A1;&#x30A4;&#x30EB;&#x3092;&#x6307;&#x5B9A;&#x3057;&#x3066;&#x3082;&#x713C;&#x304F;&#x3053;&#x3068;&#x304C;&#x3067;&#x304D;&#x308B;&#x3002;&#x3053;&#x306E;&#x5834;&#x5408;&#x306F;&#x30E1;&#x30E2;&#x30EA;&#x306B;&#x3082;&#x66F8;&#x304B;&#x308C;&#x308B;&#x306E;&#x3067;&#x5C11;&#x3057;&#x6642;&#x9593;&#x304C;&#x304B;&#x304B;&#x308B;&#x3002;&#x713C;&#x3044;&#x305F;&#x5F8C;&#x306F;&#x540C;&#x3058;&#x304F;reboot&#x5FC5;&#x9808;&#x3002;

./bin/test &#x304C;&#x554F;&#x984C;&#x306A;&#x304F;&#x52D5;&#x3044;&#x305F;&#x3089;RD53A&#x3068;&#x63A5;&#x7D9A;&#x3001;&#x96FB;&#x6E90;&#x3092;&#x6295;&#x5165;&#x3057;&#x3066; ./bin/rd53a_test &#x3092;&#x5B9F;&#x884C;&#x3057;&#x3001;

[Data] : COL(12) ROW(1) PAR(1) TOT(15,11,15,15)

&rarr;&#x3053;&#x3053;&#x3067;&#x306E;COL,ROW&#x306F;core column,core row&#x306E;&#x3053;&#x3068;&#x306A;&#x306E;&#x3067;&#x6CE8;&#x610F;(core column/row&#x306B;&#x3064;&#x3044;&#x3066;&#x306F;manual&#x306E;Pixel Addressing&#x3092;&#x53C2;&#x7167;)

&#x306E;&#x3088;&#x3046;&#x306A;&#x7D50;&#x679C;&#x304C;&#x5F97;&#x3089;&#x308C;&#x308C;&#x3070;&#x3001;config &#x304C;&#x901A;&#x3063;&#x3066;&#x3044;&#x308B;&#x3002;(current dig:0.325A , ana:~0.460A)

&#x203B;YARR&#x306E;version&#x3067;injection&#x3057;&#x3066;&#x3044;&#x308B;pixel&#x304C;&#x5909;&#x308F;&#x3063;&#x3066;&#x3044;&#x308B;&#x3053;&#x3068;&#x304C;&#x3042;&#x308B;&#x306E;&#x3067;version up&#x7B49;&#x3055;&#x308C;&#x305F;&#x5834;&#x5408;&#x306F;&#x5FC5;&#x305A;rd53a_test&#x306E;&#x4E2D;&#x8EAB;&#x3092;&#x78BA;&#x8A8D;&#x3059;&#x308B;&#x3053;&#x3068;&#xFF01;
---++ #OLD# How to configure chips and run scan

[digitalscan]

./primlist/scan53.sh digitalscan KEK53-&#x3007;

or

./bin/scanConsole -r configs/controller/specCfg.json -c configs/connectivity/example_rd53a_setup.json -s configs/scans/rd53a/std_digitalscan.json -p

&#x73FE;&#x72B6;KEK53-3&#x306B;&#x304A;&#x3044;&#x3066;direct mode&#x3067;VDDD=1.23V , VDDA=1.2V&#x3060;&#x3068;&#x304D;&#x308C;&#x3044;

[analogscan]

./primlist/scan53.sh analogscan KEK53-&#x3007;

or

./bin/scanConsole -r configs/controller/specCfg.json -c configs/connectivity/example_rd53a_setup.json -s configs/scans/rd53a/std_analogscan.json -p

[thresholdscan]

./primlist/scan53.sh thresholdscan KEK53-&#x3007; -f std(lin,diff)

or

./bin/scanConsole -r configs/controller/specCfg.json -c configs/connectivity/example_rd53a_setup.json -s configs/scans/rd53a/std_thresholdscan.json -p

std&#x3060;&#x3068;&#x5168;FE&#x306B;&#x5BFE;&#x3057;&#x3066;scan&#x3055;&#x308C;lin&#x3060;&#x3068;linear FE&#x3001;diff&#x3060;&#x3068;differential FE&#x306E;&#x307F;scan&#x3055;&#x308C;&#x308B;&#x3000;sync&#x306F;&#x672A;&#x5B9F;&#x88C5;

[tune threshold]

./primlist/scan53.sh tune_globalthreshold KEK53-&#x3007; -t {target threshold} -f std(lin,diff)

[ToT scan]

./primlist/scan53.sh totscan KEK53-&#x3007; -t {injection charge}

-- %USERSIG{KojiNakamura - 2018-03-26}%

---++ Comments

<br />%COMMENT%
Attachments
Topic attachments
I	Attachment	History	Action	Size	Date	Who
jpg	DSC_0001.jpg	r1	manage	952.9 K	2018-04-06 - 02:52	AtlasjSilicon
jpg	DSC_0002.jpg	r1	manage	931.0 K	2018-04-06 - 02:52	AtlasjSilicon
pdf	_RD53A_Manual_V3-24.pdf	r1	manage	9949.5 K	2018-06-01 - 11:14	AtlasjSilicon
This topic: Main > WebHome > RD53ADAQtop
Topic revision: r34 - 2020-10-05 - KatsuyaSato