Tags:
view all tags
---+ General Information for the ITK Pixel Testbeam ---++ Set up ---+++ tuning check CERN到着後、温度変化などでthresholdが変わっている可能性があるため、状態を確認し必要であればre-tuneする。 コントロールルームにHSIO2をセットアップし、irradモジュールはドライアイスを入れた発泡スチロールボックスの中に入れる。 終了したら、H6Bのコントロールルームにある冷蔵庫に保管。 ---+++ beam line setup *モジュール準備* 1 モジュールを解凍(乾燥空気を入れて) 1 モジュールを固定フレームに取り付け(M2ネジで) 1 フレームをネジ穴が大量に開いたテーブルに固定(3穴ずつ間隔をあける) この際、LEMO LコネクタをHV出力コネクタに取り付けておく 1 Cooling box内に設置 1 TelescopeとDUTの位置関係を記録する 1 "電源準備 3"が終了後にHV,LVケーブルを接続する 1 LANコネクタを接続 1 Chiller control PCにアクセスし、"cooling"のショートカットからcooling boxで冷却を開始する 1 ステージの動く方向(forward,backward,up,down)とセンサーのcol,row方向の対応を確認しておく(stage control PC) *電源準備* 1 powersupllyのsoftwareを起動(on DCS PC) 1 一つづつonにしていき、ケーブルやコネクタとの対応を調べる 1 各系統ごとに電圧をかけ(10Vくらい)、テスターで正常に電圧が掛かっているかをチェックする *rce準備* 1 各moduleのconfigを統合する<br />・rceconf,data dirを作り、使用するmoduleのデータをすべて移す<br />・rceのconfig fileを書く(すべてのmoduleに対応するLANコネクタとconfig fileを指定する) 1 Digital, Analog, Threshold scan, !ToT testを一通り行いmoduleの状態をチェックする 1 必要であればre-tuneする 1 !BeforeGeoIDのprimlistを作成する ---+++ DAQ system setup 1 eudaqのconfig fileを作成する(batchごと) 1 ---++ Shifter's instruction ---++++ online monitor cd ~/software/eudaq-KEK4chip/eudaq/bin ./OnlineMon.exe -f /media/niaconite_d/2016/run#.raw ---++++ Run change 1 EUdaq -> stop 1 EUdaq -> kill 1 rceOfflineProducer -> kill(ctrl+c) (on !testbeamadmin@lab125) 1 calibGui -> start ("calibGui" on !testbeamadmin@lab25) 1 primlist "beforeGeoID~~.pl" 1 memo "key# of before !GeoID primlist" 1 rceOfflineProducer -> start<br />/rceconf<br />rceOfflineProducer -r 0 -d 192.168.4.2 -i 192.168.1.2 1 positioning 1 EUdaq start (shortcut on NI crete PC) 1 EUdaq -> "Load"->"KEK_****_batch*.conf" 1 configure 1 run start ---++ Systems ---+++ NI crete PC (win) Run controlを行うPC. どのセンサーを使うかを指定するconfig fileが必要(KEK_*_batch*.conf) *立ち上げるソフト*: eudaq, !Mimosa26-JTAG, !NIproduver-MimozaData ---+++ DCS PC (win) LV, HVのオンライン制御を行う *立ち上げるソフト:* powersupply : <a href="/pub/Main/ITKPixelGeneralInfo/powersupply.pdf" target="_blank">image</a> (HV:0~7, semiHV:0~7, LV:0~7) HVのcurrent limit が効かない可能性がある。(2016 aug 時点) ---+++ Chiller control PC (win) coolingboxの制御を行う. *立ち上げるソフト:* cooling (shortcutから) ---+++ Stage control PC (win) stageの制御を行う. *立ち上げるソフト:* !Nanotec-control.vi ---+++ Terminal PC (ubuntu) すべてを統括するPC 全windows PCに対してremote desktop接続 sshでrceとrce control pcにアクセスする --memo-- ~/tmp/chrunalarm.sh -> run numberが切り替わったらアラームが鳴る ~/tmp/testread.sh -> runinfo.txtが更新されたらアラームが鳴る ---++ Drawing of rotation angle tool. * [[%ATTACHURLPATH%/rotation-labels-1.pdf][rotation-labels-1.pdf]]: rotation-labels-1.pdf ---++ Useful Links *SPS online information* [[https://op-webtools.web.cern.ch/vistar/vistars.php?usr=SPS1]] *Twiki Pixel !TestBeams* https://twiki.cern.ch/twiki/bin/view/Atlas/ITkPixelTestBeams -- %USERSIG{AtlasjSilicon - 2016-08-16}%
Attachments
Attachments
Topic attachments
I
Attachment
History
Action
Size
Date
Who
Comment
pdf
powersupply.pdf
r1
manage
321.0 K
2016-08-19 - 12:45
AtlasjSilicon
pdf
rotation-labels-1.pdf
r1
manage
4375.8 K
2016-08-16 - 17:52
AtlasjSilicon
Edit
|
Attach
|
Watch
|
P
rint version
|
H
istory
:
r28
|
r6
<
r5
<
r4
<
r3
|
B
acklinks
|
V
iew topic
|
Raw edit
|
More topic actions...
Topic revision: r4 - 2016-08-19
-
AtlasjSilicon
Home
Site map
Main web
Sandbox web
TWiki web
Main Web
Users
Groups
Index
Search
Changes
Notifications
RSS Feed
Statistics
Preferences
P
View
Raw View
Print version
Find backlinks
History
More topic actions
Edit
Raw edit
Attach file or image
Edit topic preference settings
Set new parent
More topic actions
Account
Log In
Edit
Attach
Copyright © 2008-2025 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki?
Send feedback