ISEGcontrolInstruction < Main

---+ ISEG controll instruction

%TOC%
---++ Hardware information

Wiener/ISEG URL : http://www.wiener-d.com/sc/power-supplies/mpod--lvhv/mpod-hv-module.html

| Crate | MPOD crate |
| LV module | MPV 8008I |
| HV module 1 | EHS 8405n104_F_ID |
| HV module 2 | EHS 8420n104_F_ID |
 
---++ Software Installation(Linux CERN CentOS 7)

Download

URL : https://iseg-hv.com/en/products/control#software

&#x4E0B;&#x306E;&#x65B9;explore iseg FTP server&#x304B;&#x3089;&#x3000;

Root &gt; SOFTWARE &gt; isegSNMPcontrol &gt; current
<verbatim>% mkdir iseg ; cd iseg
% wget https://iseg-hv.com/download/SOFTWARE/isegSNMPcontrol/current/isegSnmpControl-SL71-x64-1.1.7.0.zip
% unzip isegSnmpControl-SL71-x64-1.1.7.0.zip
% cd isegSnmpControl-SL71-x64-1.1.7.0/
% chmod 755 start.sh
% sudo cp WIENER-CRATE-MIB.txt /usr/share/snmp/mibs/</verbatim>
---++ How to start Software?

% ./start.sh
---++ Software Instruction

Full instruction is here : http://atlaspc5.kek.jp/silicon/tmp/isegSnmpControl-SL71-x64-1.1.7.0/documentation/index.html
---+++ 

-- %USERSIG{KojiNakamura - 2018-01-17}%

---++ Comments

%COMMENT%

This topic: Main > WebHome > FermilabTestbeamTop > FermilabTestbeam2018 > ISEGcontrolInstruction
Topic revision: r1 - 2018-01-17 - KojiNakamura