DAQ development for FE65-P2 chip

Introduction

FE65-P2 is the readout ASIC with 65nm processing as pre-pre-production for the RD53A /B chips used by HL-LHC ITK pixel upgrade.

more information is available in :

motivation talk in AUW April 2016

Timon's talk in AUW April 2016

Timon's Twiki

Bump Bonding at SLAC

DAQ development by SPEC

• Installed CERN CentOS7 to pcatutt21.cern.ch
• Installed SLC6 to keksipc01 : at KEK ip=130.87.243.35

How to setup SPEC board

• on SLC6 or CentOS7
  • need devtoolset-2 for gcc48
• install font for gnuplot

  sudo yum -y install xorg-x11-fonts-ISO8859*

• install software and firmware from git

mkdir -p /home/atlasj/work/SPEC/YARR 
cd /home/atlasj/work/SPEC/YARR/
git clone https://github.com/Yarr/Yarr.git
git fetch
git checkout fe65_p2
cd /home/atlasj/work/SPEC/YARR/Yarr/src/kernel
make
sudo make install
sudo depmod
cd ../ ; make

• install driver and program firmware to the SPEC card FPGA

  sudo rmmod specDriver

sudo modprobe  specDriver
bin/programFpga ../hdl/syn/yarr_fe65p2_revB.bit
bin/test
 

bin/benchmarkDma 

Images

DSC_1418	DSC_1420	DSC_1421	DSC_1423
DSC_1424	DSC_1425	DSC_1426	DSC_1434
DSC_1459	DSC_1464	DSC_1466	DSC_1467
DSC_1505	DSC_1509	DSC_1510	IMG_1573
IMG_1574	IMG_1575	IMG_1576	PL21_bottom
PL21_bottom_middle	PL51_bottom	PL51_bottom_middle	PL51_bottom_right

-- Koji Nakamura - 2016-04-21