#!/bin/bash
# install root  :  svn co https://root.cern.ch/svn/root/tags/v5-34-34
# cp ~atlasj/Downloads/libusb-1.0.9.tar.bz2  . 
# tar -jxvf src/libusb-1.0.9.tar.bz2 
#cd libusb-1.0.9/
#./configure --prefix=/usr/local 
#make 
#make install 

PYTHONVERSION=2.7.9
ROOT5VERSION=v5.34.36
ROOTVERSION=v6.06.02


yum -y install qt5-*  libXpm libXpm-devel libXpm  libusb* qwt qwt-devel telnet

mkdir -p /home/sisoft/usbpix
cd /home/sisoft/usbpix


if [ 0 ]
then
    svn co http://icwiki.physik.uni-bonn.de/svn/USBpixI4/host/tags/release-5.0.1
    cd release-5.0.1
    source /usr/local/ROOT/$ROOT5VERSION/bin/thisroot.sh
    export QT5DIR="/usr/lib64/qt5"
    source setup.sh 
    make 
    make install 
    cp  driver/linux/53-usbpix.rules /etc/udev/rules.d 
    
    cat >> usbpixsetup.sh <<EOF
#!/bin/bash                                                                     
source /opt/rh/devtoolset-2/enable
cd /home/sisoft/usbpix/release-5.0.1/
source /usr/local/ROOT/$ROOT5VERSION/bin/thisroot.sh
export QT5DIR="/usr/lib64/qt5"
source setup.sh
cd -
EOF

    cd ../
fi

for iUPv in 5.3 5.5 5.6
do 
    svn co http://icwiki.physik.uni-bonn.de/svn/USBpixI4/host/tags/release-${iUPv}
    cd release-${iUPv}
    source /usr/local/Python/$PYTHONVERSION/bin/thispython.sh
    source /opt/rh/devtoolset-2/enable
    source /usr/local/ROOT/$ROOTVERSION/bin/thisroot.sh
    export QT5DIR="/usr/lib64/qt5"
    source setup.sh 
    make 
    make install

    cat >> usbpixsetup.sh <<EOF
#!/bin/bash                                                                     
source /usr/local/Python/$PYTHONVERSION/bin/thispython.sh
source /opt/rh/devtoolset-2/enable
cd /home/sisoft/usbpix/release-${iUPv}/
source /usr/local/ROOT/$ROOTVERSION/bin/thisroot.sh
export QT5DIR="/usr/lib64/qt5"
source setup.sh
cd -
EOF
    cd ../
done