---+ LaserMeasurement -- %USERSIG{TatsukiUeda - 2020-10-19}% ---++ Laser Light Amplification by Stimulated emission of Radiation の略 ---++ How to use infra-red laser 1 本体の鍵を回して電源をONにする 1 atlaspc23にある"Tera Term"を起動すると初期画面が出てくる 1 Serialを選択 1 PortはCOM5をバナーから選択する→OK 1 setup→terminalを選択 1 New lineのReceiveをAUTOに変更 1 Local echoにチェックを入れる→OK 1 setup→serial portを選択 1 speedを19200に変更→New Setting 1 あとはコマンドで動かします ---++++++ よく使うコマンド ※コマンドは一度でもタイプミスするとdeleteもできないのでenterを押して、もう一度打ち直さないといけない ※pump powerや周波数はレーザーがdisableの状態でないと変更できない * state? : システムの情報を表示 * help? : 使えるコマンドを表示 * ld? : レーザーが出ているかどうかを表示 * ld= : ld=1でレーザーenable, ld=0でレーザーdisableになる * ldc? : pump power(=レーザーの出力の強さ)を表示 * ldc= : pump powerを0~800mVで設定 * f? : 周波数を表示 * f= : 周波数を48k~1.2MHzで設定 ---++ Ng-Yag Lazer Ng→ネオジム Yag→Y3Al5O12 イットリウムとアルミニウムのガーネット型複合化合物 ---++ Results spread sheet (result data) https://docs.google.com/spreadsheets/d/1xBX7Y21ashRRyGfPmUFlKSxI_QUs9rSSRgtIDoK6C7s/edit?usp=sharing ---++ Comments %COMMENT%
This topic: Main
>
LGADGeneralInformation
>
LaserMeasurement
Topic revision: r3 - 2022-04-14 - IkumiGoya
Copyright © 2008-2025 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki?
Send feedback