July2019DESYTBlog < Main

---+ July 2019 DESY Testbeam log page

---++ July 22, 2019

8:00 breakfast meeting with Andre

8:40 registered DACHS card at bld. 6

9:30 received DACHS card

13:00 safety training (only listen, no test)

15:00 setup

---++++ about setup

constraction YARR system

login user:testbeam

the YARR pc IP address -&gt; 192.168.22.199

( BDAQ IP -&gt; 192.168.22.198 )

( Run Control PC IP -&gt; 192.168.22.1 )

( NI crate IP -&gt; 192.168.22.2 )

install new software ( https://yarr.readthedocs.io/en/latest/install/ )

and

install new firmware ( https://yarr.web.cern.ch/yarr/firmware/ -&gt; "2019_07_21-rd53a_ohio_3chip_1tlu-xpressk7_325.bit" )

source /opt/Xilinux/Vivado/%RED%2016.02%ENDCOLOR%/settings64.sh

python flash.sh (@ ~/work/yarr_rd53a/YARR-FW(Yarr is a symbolic link with Yarr-fw_20190722)/script)

select #6 (rd53a_ohio_3chip_1tlu_xpressk7_160.bit)

if finish, reboot.

./bin/scanConsole -r configs/controller/specCfg.json -c configs/connectivity/example_rd53a_setup.json -s configs/scans/rd53a/std_digitalscan.json -p (@ ~/work/yarr_rd53a/Yarr) &lt;- this is like rd53a_test

producer, communication between run control PC and BDAQ PC

cards for read out some module by creating Nakamura working test

multi module working test

-- %USERSIG{KojiNakamura - 2019-07-22}%

---++ Comments

%COMMENT%

This topic: Main > PlanerPixelTestBeam > July2019DESYTestbeam > July2019DESYTBlog
Topic revision: r2 - 2019-07-23 - AtlasjSilicon