ITKPixelGeneralInfo < Main

---+ General Information for the ITK Pixel Testbeam

<br /><span data-mce-mark="1">%TOC%</span>
---++ Set up
---+++ tuning check

CERN&#x5230;&#x7740;&#x5F8C;&#x3001;&#x6E29;&#x5EA6;&#x5909;&#x5316;&#x306A;&#x3069;&#x3067;threshold&#x304C;&#x5909;&#x308F;&#x3063;&#x3066;&#x3044;&#x308B;&#x53EF;&#x80FD;&#x6027;&#x304C;&#x3042;&#x308B;&#x305F;&#x3081;&#x3001;&#x72B6;&#x614B;&#x3092;&#x78BA;&#x8A8D;&#x3057;&#x5FC5;&#x8981;&#x3067;&#x3042;&#x308C;&#x3070;re-tune&#x3059;&#x308B;&#x3002;

&#x30B3;&#x30F3;&#x30C8;&#x30ED;&#x30FC;&#x30EB;&#x30EB;&#x30FC;&#x30E0;&#x306B;HSIO2&#x3092;&#x30BB;&#x30C3;&#x30C8;&#x30A2;&#x30C3;&#x30D7;&#x3057;&#x3001;irrad&#x30E2;&#x30B8;&#x30E5;&#x30FC;&#x30EB;&#x306F;&#x30C9;&#x30E9;&#x30A4;&#x30A2;&#x30A4;&#x30B9;&#x3092;&#x5165;&#x308C;&#x305F;&#x767A;&#x6CE1;&#x30B9;&#x30C1;&#x30ED;&#x30FC;&#x30EB;&#x30DC;&#x30C3;&#x30AF;&#x30B9;&#x306E;&#x4E2D;&#x306B;&#x5165;&#x308C;&#x308B;&#x3002;

&#x7D42;&#x4E86;&#x3057;&#x305F;&#x3089;&#x3001;H6B&#x306E;&#x30B3;&#x30F3;&#x30C8;&#x30ED;&#x30FC;&#x30EB;&#x30EB;&#x30FC;&#x30E0;&#x306B;&#x3042;&#x308B;&#x51B7;&#x8535;&#x5EAB;&#x306B;&#x4FDD;&#x7BA1;&#x3002;

---+++ beam line setup

*&#x30E2;&#x30B8;&#x30E5;&#x30FC;&#x30EB;&#x6E96;&#x5099;*
   1 &#x30E2;&#x30B8;&#x30E5;&#x30FC;&#x30EB;&#x3092;&#x89E3;&#x51CD;&#xFF08;&#x4E7E;&#x71E5;&#x7A7A;&#x6C17;&#x3092;&#x5165;&#x308C;&#x3066;&#xFF09;
   1 &#x30E2;&#x30B8;&#x30E5;&#x30FC;&#x30EB;&#x3092;&#x56FA;&#x5B9A;&#x30D5;&#x30EC;&#x30FC;&#x30E0;&#x306B;&#x53D6;&#x308A;&#x4ED8;&#x3051;&#xFF08;M2&#x30CD;&#x30B8;&#x3067;&#xFF09;
   1 &#x30D5;&#x30EC;&#x30FC;&#x30E0;&#x3092;&#x30CD;&#x30B8;&#x7A74;&#x304C;&#x5927;&#x91CF;&#x306B;&#x958B;&#x3044;&#x305F;&#x30C6;&#x30FC;&#x30D6;&#x30EB;&#x306B;&#x56FA;&#x5B9A;&#xFF08;3&#x7A74;&#x305A;&#x3064;&#x9593;&#x9694;&#x3092;&#x3042;&#x3051;&#x308B;&#xFF09;&#x3000;&#x3053;&#x306E;&#x969B;&#x3001;LEMO L&#x30B3;&#x30CD;&#x30AF;&#x30BF;&#x3092;HV&#x51FA;&#x529B;&#x30B3;&#x30CD;&#x30AF;&#x30BF;&#x306B;&#x53D6;&#x308A;&#x4ED8;&#x3051;&#x3066;&#x304A;&#x304F;
   1 Cooling box&#x5185;&#x306B;&#x8A2D;&#x7F6E;
   1 Telescope&#x3068;DUT&#x306E;&#x4F4D;&#x7F6E;&#x95A2;&#x4FC2;&#x3092;&#x8A18;&#x9332;&#x3059;&#x308B;
   1 "&#x96FB;&#x6E90;&#x6E96;&#x5099; 3"&#x304C;&#x7D42;&#x4E86;&#x5F8C;&#x306B;HV,LV&#x30B1;&#x30FC;&#x30D6;&#x30EB;&#x3092;&#x63A5;&#x7D9A;&#x3059;&#x308B;
   1 LAN&#x30B3;&#x30CD;&#x30AF;&#x30BF;&#x3092;&#x63A5;&#x7D9A;
   1 Chiller control PC&#x306B;&#x30A2;&#x30AF;&#x30BB;&#x30B9;&#x3057;&#x3001;"cooling"&#x306E;&#x30B7;&#x30E7;&#x30FC;&#x30C8;&#x30AB;&#x30C3;&#x30C8;&#x304B;&#x3089;cooling box&#x3067;&#x51B7;&#x5374;&#x3092;&#x958B;&#x59CB;&#x3059;&#x308B;
   1 &#x30B9;&#x30C6;&#x30FC;&#x30B8;&#x306E;&#x52D5;&#x304F;&#x65B9;&#x5411;(forward,backward,up,down)&#x3068;&#x30BB;&#x30F3;&#x30B5;&#x30FC;&#x306E;col,row&#x65B9;&#x5411;&#x306E;&#x5BFE;&#x5FDC;&#x3092;&#x78BA;&#x8A8D;&#x3057;&#x3066;&#x304A;&#x304F;(stage control PC)
*&#x96FB;&#x6E90;&#x6E96;&#x5099;*
   1 powersuplly&#x306E;software&#x3092;&#x8D77;&#x52D5;&#xFF08;on DCS PC&#xFF09;
   1 &#x4E00;&#x3064;&#x3065;&#x3064;on&#x306B;&#x3057;&#x3066;&#x3044;&#x304D;&#x3001;&#x30B1;&#x30FC;&#x30D6;&#x30EB;&#x3084;&#x30B3;&#x30CD;&#x30AF;&#x30BF;&#x3068;&#x306E;&#x5BFE;&#x5FDC;&#x3092;&#x8ABF;&#x3079;&#x308B;
   1 &#x5404;&#x7CFB;&#x7D71;&#x3054;&#x3068;&#x306B;&#x96FB;&#x5727;&#x3092;&#x304B;&#x3051;&#xFF08;10V&#x304F;&#x3089;&#x3044;&#xFF09;&#x3001;&#x30C6;&#x30B9;&#x30BF;&#x30FC;&#x3067;&#x6B63;&#x5E38;&#x306B;&#x96FB;&#x5727;&#x304C;&#x639B;&#x304B;&#x3063;&#x3066;&#x3044;&#x308B;&#x304B;&#x3092;&#x30C1;&#x30A7;&#x30C3;&#x30AF;&#x3059;&#x308B;
*rce&#x6E96;&#x5099;*
   1 tuningdata&#x3092;&#x4E0B;&#x306E;PC&#x306B;&#x79FB;&#x3059;<br />&#x30FC; usb&#x3067;&#x76F4;&#x63A5;&#x6301;&#x3063;&#x3066;&#x3044;&#x304F;&#x307E;&#x305F;&#x306F;&#x4E0A;&#x306E;ubuntu&#x304B;&#x3089;rsync&#x3059;&#x308B;<br />&#xFF08;rsync -av -e -ssh /media/telescope/usbname/data_dir testbeamadmin&#xFF20;192.168.4.15:/work1/testbeamadmin/HSIO2/KEK&#xFF09;
   1 &#x5404;module&#x306E;config&#x3092;&#x7D71;&#x5408;&#x3059;&#x308B;<br />&#x30FB;rceconf,data dir&#x3092;&#x4F5C;&#x308A;&#x3001;&#x4F7F;&#x7528;&#x3059;&#x308B;module&#x306E;&#x30C7;&#x30FC;&#x30BF;&#x3092;&#x3059;&#x3079;&#x3066;&#x79FB;&#x3059;<br />&#x30FB;rce&#x306E;config file&#x3092;&#x66F8;&#x304F;&#xFF08;&#x3059;&#x3079;&#x3066;&#x306E;module&#x306B;&#x5BFE;&#x5FDC;&#x3059;&#x308B;LAN&#x30B3;&#x30CD;&#x30AF;&#x30BF;&#x3068;config file&#x3092;&#x6307;&#x5B9A;&#x3059;&#x308B;&#xFF09;
   1 Digital, Analog, Threshold scan, !ToT test&#x3092;&#x4E00;&#x901A;&#x308A;&#x884C;&#x3044;module&#x306E;&#x72B6;&#x614B;&#x3092;&#x30C1;&#x30A7;&#x30C3;&#x30AF;&#x3059;&#x308B;
   1 &#x5FC5;&#x8981;&#x3067;&#x3042;&#x308C;&#x3070;re-tune&#x3059;&#x308B;
   1 !BeforeGeoID&#x306E;primlist&#x3092;&#x4F5C;&#x6210;&#x3059;&#x308B;
---+++ DAQ system setup

eudaq&#x306E;config fiile&#x3092;&#x4F5C;&#x6210;&#x3059;&#x308B;&#xFF08;batch&#x3054;&#x3068;&#xFF09;
   * OrMask &#xFF08;TLU&#x306E;LAN&#x306E;&#x3069;&#x308C;&#x3092;&#x4F7F;&#x3063;&#x3066;&#x3044;&#x308B;&#x304B;&#x3092;&#x66F8;&#x304F;&#x3001;&#x3044;&#x3064;&#x3082;&#x3060;&#x3044;&#x305F;&#x3044;0
   * AndMask &#xFF08;&#x30B7;&#x30F3;&#x30C1;&#x306E;&#x3069;&#x308C;&#x3092;&#x4F7F;&#x3063;&#x3066;&#x3044;&#x308B;&#x304B;&#xFF08;&#x4E0A;&#x6D41;&#x304B;&#x3089;&#xFF09;bit&#x6F14;&#x7B97;&#xFF09;
   * DutMask &#xFF08;TLU&#x306E;LAN&#x306E;&#x3069;&#x308C;&#x3092;&#x4F7F;&#x3063;&#x3066;&#x3044;&#x308B;&#x304B;&#x3092;&#x66F8;&#x304F;bit&#x6F14;&#x7B97;&#xFF09;
   * TriggerType &#xFF08;1&#x304C;mimosa&#xFF09;
   * EnableDUTveto &#xFF08;telescope&#x3067;trigger&#x3092;veto&#x3057;&#x306A;&#x3044;&#x3088;&#x3046;&#x306B;-1&#x3057;&#x3066;2&#x306B;&#x3059;&#x308B;&#xFF08;telescope&#x306F;LAN1&#x306B;&#x3064;&#x306A;&#x304C;&#x3063;&#x3066;&#x3044;&#x308B;&#x3001;3&#x306F;telescope&#x3068;HSIO2&#x3092;&#x5165;&#x308C;&#x308B;&#xFF09;&#x3002;2&#x3068;&#x3044;&#x3046;&#x306E;&#x306F;DUT&#x304B;&#x3089;&#x4E00;&#x500B;&#x3082;&#x53CD;&#x5FDC;&#x304C;&#x306A;&#x304F;&#x3066;&#x3082;data&#x3092;&#x53D6;&#x308B;&#x3088;&#x3046;&#x306B;&#x3059;&#x308B;&#xFF08; triggerID&#x304C;&#x9032;&#x3080;)&#xFF09;
   * nFrontEnds&#xFF08;&#x8AAD;&#x307F;&#x51FA;&#x3059;ASIC&#x306E;&#x6570;&#xFF09;
   * TriggerInterval 1&#x306B;&#x3059;&#x308B;&#x3068;1kHz&#x306E;&#x64EC;&#x4F3C;&#x30A4;&#x30D9;&#x30F3;&#x30C8;&#x3092;&#x751F;&#x6210;&#x3059;&#x308B;&#x3002;
   * DUT&#x306E;config&#x306E;path&#x3082;&#x5909;&#x3048;&#x308B;
   * 

---++ Shifter's instruction
---+++ How to start rceOfflineProducer(!H6B)
   * "ssh !testbeam@192.168.5.20"
   * "ssh root@rce0"
   * "source setup.sh"
   * "calibserver" (then start calibserver)
   * launch another terminal
   * "source daq/rce/scripts/setup-env.sh"
   * "rceOfflineProducer -r 0 -d 192.168.5.2 -i 192.168.1.77"
   * check rceOfflineProducer is added Run Control
---+++ How to start !YarrEudaqProducer(!H6B)
   * "ssh !testbeam@192.168.5.20"
   * "cd ~/work/yarr_rd53a/YarrEudaqProducer_20180704/configs"
   * if you already have tuned configuration file, command like "cp {configuration file path} KEKconfigs/KEK53-7_tuned_4000_3000_1200.json".
   * make cymbolic link of configuration file like "ln -s KEKconfigs/KEK53-7_tuned_4000_3000_1200.json rd53a_test.json".
   * "cd ../" (move to "~/work/yarr_rd53a/YarrEudaqProducer_20180704/")
   * start !YarrEudaqProducer "./bin/YarrProducer -h configs/controller/specCfgExtTrigger.json -c configs/connectivity/example_rd53a_setup.json -s configs/scans/rd53a/std_Exttrigger.json -r 192.168.5.2"
   * check !YarrProducer is added Run Control
---++++ data taking&#x4E2D;&#x306B;system&#x304C;&#x843D;&#x3061;&#x305F;&#x3068;&#x304D;
   1 hard&#x304C;&#x6B63;&#x5E38;&#x306A;&#x3053;&#x3068;&#x3092;&#x78BA;&#x8A8D;
   1 terminal PC&#x3067;remote desktop&#x306E;NI crate/DCS/Chiller control/Stage control&#x304C;&#x7E4B;&#x304C;&#x3063;&#x3066;&#x3044;&#x308B;&#x304B;&#x78BA;&#x8A8D;
      * &#x7E4B;&#x304C;&#x3063;&#x3066;&#x3044;&#x306A;&#x3051;&#x308C;&#x3070;Remmina Remote Desktop Client&#x3067;&#x518D;&#x63A5;&#x7D9A;
   1 DUT&#x3092;control&#x3057;&#x3066;&#x3044;&#x308B;PC&#x306B;ssh
      * 2017May&#x306E;&#x5834;&#x5408;1: pcatutt21(192.168.4.90:FE65DAQ&#x7528;SPEC&#x30AB;&#x30FC;&#x30C9;&#x304C;&#x3042;&#x308B;PC) -&gt; [[FE65p2ChipDAQ#tuning][aaa]] (FPGA&#x7ACB;&#x3061;&#x4E0A;&#x3052;:&#x5FC5;&#x8981;&#x306B;&#x5FDC;&#x3058;&#x3066;tuning)
      * 2017May&#x306E;&#x5834;&#x5408;2: pcx17261(!testbeam@192.168.4.15:HSIO2&#x7528;PC) -&gt; [[HSIO2Instruction#CalibGui_x4_E0A][bbb]] (Calibsever&#x7ACB;&#x3061;&#x4E0A;&#x3052;)
   1 Run Control&#x3092;&#x7ACB;&#x3061;&#x4E0A;&#x3052; -&gt; ccc (run restart)
   1 Producer&#x3092;&#x7ACB;&#x3061;&#x4E0A;&#x3052;&#x3066;Run Control&#x306B;include&#x3055;&#x308C;&#x305F;&#x304B;&#x78BA;&#x8A8D;
      * 2017May&#x306E;&#x5834;&#x5408;1: FE65&#x7528;&#x306E;PC&#x306B;ssh&#x3057;&#x305F;&#x5148;&#x3067;
      * cd work/SPEC/Yarr-eudac/eudet/
      * ./bin/yarr_fe65p2_producer ./configs/(&#x4F7F;&#x3044;&#x305F;&#x3044;config&#x30D5;&#x30A1;&#x30A4;&#x30EB;&#x540D;)
      * 2017May&#x306E;&#x5834;&#x5408;2: HSIO2&#x7528;&#x306E;PC&#x306B;ssh&#x3057;&#x305F;&#x5148;&#x3067;
      * .....
   1 Run Control&#x3067;config&#x30D5;&#x30A1;&#x30A4;&#x30EB;&#x3092;load&#x3057;&#x3066;config(state&#x306F;pointer&#x3067;&#x89E6;&#x3089;&#x306A;&#x3044;&#x3068;&#x5909;&#x5316;&#x3057;&#x306A;&#x3044;&#x306E;&#x3067;&#x304F;&#x308B;&#x304F;&#x308B;&#x89E6;&#x3063;&#x3066;&#x304A;&#x304F;)
   1 Run Control&#x3067;start!!
---++++ monitoring
   1 File Bytes&#x304C;1GB&#x3092;&#x8D85;&#x3048;&#x308B;&#x3068;&#x3001;Run Number&#x304C;&#x5909;&#x308F;&#x308B;
   1 &#x65B0;&#x3057;&#x3044;Run #&#x3067;Online monitor&#x3092;&#x8D70;&#x3089;&#x305B;&#x308B;
   1 Data not valid&#x304C;&#x9023;&#x767A;&#x3057;&#x3066;&#x3044;&#x306A;&#x3044;&#x304B;&#x9010;&#x6B21;&#x30C1;&#x30A7;&#x30C3;&#x30AF;&#x3059;&#x308B;
   1 Run info&#x306E;&#x30B9;&#x30AF;&#x30EA;&#x30D7;&#x30C8;&#x304C;&#x524D;&#x306E;run&#x306E;&#x89E3;&#x6790;&#x3092;&#x7D42;&#x4E86;&#x3057;&#x305F;&#x3089;<br />&#x30FB;&#x958B;&#x59CB;&#x6642;&#x523B;<br />&#x30FB;&#x7D42;&#x4E86;&#x6642;&#x523B;<br />&#x30FB;&#x30A4;&#x30D9;&#x30F3;&#x30C8;&#x6570;<br />&#x3092;BeamTest&#x306E;spreadsheet&#x306B;&#x8A18;&#x5165;&#x3059;&#x308B;
---++++ online monitor

<s>cd ~/software/eudaq-KEK4chip/eudaq/bin</s>

<s>./OnlineMon.exe -f /media/niaconite_d/2016/run#.raw</s>

cd ~/software/eudaq-v1Xdev_yarr/

./bin/OnlineMon.exe -f ~/data/run#.raw -sc 0
---++++ Run info

cd ~/software/usefulscripts

tail -f runinfo.txt (maybe need to modify testread.sh)
---++++ Run change
   1 EUdaq -&gt; stop
   1 EUdaq -&gt; kill
   1 rceOfflineProducer -&gt; kill(ctrl+c) (on !testbeamadmin@lab125)
   1 calibGui -&gt; start ("calibGui" on !testbeamadmin@lab25)
   1 primlist "beforeGeoID~~.pl"
   1 memo "key# of before !GeoID primlist"
   1 rceOfflineProducer -&gt; start<br />/rceconf<br />rceOfflineProducer -r 0 -d 192.168.4.2 -i 192.168.1.2
   1 positioning
   1 EUdaq start (shortcut on NI crete PC)
   1 EUdaq -&gt; "Load"-&gt;"KEK_****_batch*.conf"
   1 configure
   1 run start
---+++ Errors

*Online monitor&#x3067;Event not valid&#x304C;&#x5927;&#x91CF;&#x767A;&#x751F;*

&#x30FC; &#x3042;&#x307E;&#x308A;&#x306B;&#x3082;&#x9577;&#x304F;&#x7D9A;&#x304F;&#x5834;&#x5408;&#x306F;&#x30C7;&#x30FC;&#x30BF;&#x53CE;&#x96C6;&#x306B;&#x5F71;&#x97FF;&#x304C;&#x51FA;&#x308B;&#x306E;&#x3067;&#x4EE5;&#x4E0B;&#x306E;&#x624B;&#x9806;&#x306B;&#x5F93;&#x3044;stop&#x3059;&#x308B;<br />&#x30FC;&#x4F55;&#x56DE;&#x304B;&#x304A;&#x304D;&#x306B;&#x30A8;&#x30E9;&#x30FC;&#x304C;&#x6570;&#x500B;&#x5165;&#x308B;&#x3050;&#x3089;&#x3044;&#x3067;&#x3042;&#x308C;&#x3070;&#x5927;&#x4E08;&#x592B;<br /><br />
   1 kill !rceOddlineProducer (ctrl+c)
   1 kill EUdaq (shortcut icon)
   1 rebootHSIO -r 0 (on the terminal of calibGui)
   1 ssh rcr0 -l root and start calibserver again
   1 start EUdaq (short cut icon), then start rceOfflineProducer
   1 Load configure file (on run control)
   1 configure
   1 start run

*&#x3042;&#x308B;chip&#x306E;Config&#x304C;&#x901A;&#x3089;&#x306A;&#x304F;&#x306A;&#x3063;&#x305F;&#x5834;&#x5408;*

&#x30FC; config&#x304C;&#x901A;&#x3063;&#x3066;&#x306A;&#x3044;chip&#x304C;&#x3042;&#x308B;&#x3068;event build&#x3055;&#x308C;&#x306A;&#x304F;&#x306A;&#x308B;&#x306E;&#x3067;&#x4EE5;&#x4E0B;&#x306E;&#x624B;&#x9806;&#x306B;&#x5F93;&#x3063;&#x3066;&#x5BFE;&#x51E6;&#x3059;&#x308B;<br /><br />
   1 run stop
   1 kill !rceOddlineProducer (ctrl+c)
   1 kill EUdaq (shortcut icon)
   1 LV power cycle
   1 edit config file (*.conf)
   1 congig&#x304C;&#x901A;&#x3089;&#x306A;&#x3044;chip&#x306E;&#x8A18;&#x8FF0;&#x3092;&#x5225;&#x306E;&#x6B63;&#x5E38;&#x306A;&#x30C1;&#x30C3;&#x30D7;&#x306B;&#x3068;&#x308A;&#x3042;&#x3048;&#x305A;&#x6307;&#x5B9A;&#x3059;&#x308B;
   1 start EUdaq (short cut icon), then start rceOfflineProducer
   1 Load configure file (on run control)
   1 configure
   1 start run

&#x3069;&#x3046;&#x3057;&#x3066;&#x3082;&#x305D;&#x306E;&#x30C1;&#x30C3;&#x30D7;&#x306E;&#x30C7;&#x30FC;&#x30BF;&#x304C;&#x5FC5;&#x8981;&#x306A;&#x5834;&#x5408;&#x306F;&#x3001;LAN&#x30B3;&#x30CD;&#x30AF;&#x30BF;&#x306E;&#x63A5;&#x7D9A;&#x306A;&#x3069;&#x3092;&#x78BA;&#x8A8D;&#x3057;&#x3066;&#x307F;&#x308B;

*Radiation alarm&#x304C;&#x9CF4;&#x3063;&#x305F;&#x5834;&#x5408;*

&#x30D3;&#x30FC;&#x30E0;&#x306E;&#x5F37;&#x3055;&#x304C;&#x5909;&#x308F;&#x3063;&#x305F;&#x969B;(1spill&#x304B;&#x3089;2spill&#x306B;&#x5909;&#x66F4;&#x3057;&#x305F;&#x306A;&#x3069;)&#x3001;&#x30C0;&#x30F3;&#x30D7;&#x304B;&#x3089;&#x767A;&#x751F;&#x3059;&#x308B;&#x653E;&#x5C04;&#x7DDA;&#x304C;&#x5897;&#x3048;radhiation alarm&#x304C;&#x9CF4;&#x308B;&#x3053;&#x3068;&#x304C;&#x3042;&#x308B;

cf) 14&mu;sV/h &#x3067;&#x30A2;&#x30E9;&#x30FC;&#x30E0;&#x3001;20&mu;sV/h &#x3067;&#x30D3;&#x30FC;&#x30E0;&#x304C;&#x843D;&#x3061;&#x308B;&#x305F;&#x3081;&#x65E9;&#x6025;&#x306B;&#x5BFE;&#x51E6;&#x3057;&#x306A;&#x3051;&#x308C;&#x3070;&#x306A;&#x3089;&#x306A;&#x3044;

-&#x30D3;&#x30FC;&#x30E0;&#x306E;&#x30B3;&#x30EA;&#x30E1;&#x30FC;&#x30BF;&#x306E;&#x5F84;&#xFF1F;&#x3092;&#x5909;&#x66F4;&#x3059;&#x308B;&#x3053;&#x3068;&#x3067;&#x5BFE;&#x51E6;&#x3059;&#x308B;

---++ Systems
---+++ NI crete PC (win)

Run control&#x3092;&#x884C;&#x3046;PC. &#x3069;&#x306E;&#x30BB;&#x30F3;&#x30B5;&#x30FC;&#x3092;&#x4F7F;&#x3046;&#x304B;&#x3092;&#x6307;&#x5B9A;&#x3059;&#x308B;config file&#x304C;&#x5FC5;&#x8981;(KEK_*_batch*.conf)

config file&#x306F;&#x3000;c: local/opt/eudaq/conf

mimosa&#x3078;&#x306E;HV&#x5370;&#x52A0;&#x96FB;&#x5727;&#x306F;8V

*&#x7ACB;&#x3061;&#x4E0A;&#x3052;&#x308B;&#x30BD;&#x30D5;&#x30C8;*: eudaq, !Mimosa26-JTAG, !NIproduver-MimozaData

EUDAQ v1.6 (Run control: v1.7&#x3060;&#x3068;&#x52D5;&#x304B;&#x306A;&#x3044;&#x306E;&#x3067;&#x6CE8;&#x610F;)
---+++ DCS PC (win)

LV, HV&#x306E;&#x30AA;&#x30F3;&#x30E9;&#x30A4;&#x30F3;&#x5236;&#x5FA1;&#x3092;&#x884C;&#x3046;

*&#x7ACB;&#x3061;&#x4E0A;&#x3052;&#x308B;&#x30BD;&#x30D5;&#x30C8;:* powersupply : <a href="/pub/Main/ITKPixelGeneralInfo/powersupply.pdf" target="_blank">image</a> (HV:0~7, semiHV:0~7, LV:0~7)

HV&#x306E;current limit &#x304C;&#x52B9;&#x304B;&#x306A;&#x3044;&#x53EF;&#x80FD;&#x6027;&#x304C;&#x3042;&#x308B;&#x3002;&#xFF08;2016 aug &#x6642;&#x70B9;&#xFF09;
---+++ Chiller control PC (win)

coolingbox&#x306E;&#x5236;&#x5FA1;&#x3092;&#x884C;&#x3046;.

*&#x7ACB;&#x3061;&#x4E0A;&#x3052;&#x308B;&#x30BD;&#x30D5;&#x30C8;:* cooling (shortcut&#x304B;&#x3089;)

21&#x306E;Error&#x304C;&#x51FA;&#x3066;&#x3044;&#x305F;&#x3089;&#x3001;&#x30D2;&#x30E5;&#x30FC;&#x30BA;&#x304C;&#x98DB;&#x3093;&#x3067;&#x3044;&#x308B;
---+++ Stage control PC (win)

stage&#x306E;&#x5236;&#x5FA1;&#x3092;&#x884C;&#x3046;.

*&#x7ACB;&#x3061;&#x4E0A;&#x3052;&#x308B;&#x30BD;&#x30D5;&#x30C8;:* !Nanotec-control.vi
---+++ Terminal PC (ubuntu)

&#x3059;&#x3079;&#x3066;&#x3092;&#x7D71;&#x62EC;&#x3059;&#x308B;PC

&#x5168;windows PC&#x306B;&#x5BFE;&#x3057;&#x3066;remote desktop&#x63A5;&#x7D9A;

ssh&#x3067;rce&#x3068;rce control pc&#x306B;&#x30A2;&#x30AF;&#x30BB;&#x30B9;&#x3059;&#x308B;

--memo-- ~/tmp/chrunalarm.sh -&gt; run number&#x304C;&#x5207;&#x308A;&#x66FF;&#x308F;&#x3063;&#x305F;&#x3089;&#x30A2;&#x30E9;&#x30FC;&#x30E0;&#x304C;&#x9CF4;&#x308B;

~/tmp/testread.sh -&gt; runinfo.txt&#x304C;&#x66F4;&#x65B0;&#x3055;&#x308C;&#x305F;&#x3089;&#x30A2;&#x30E9;&#x30FC;&#x30E0;&#x304C;&#x9CF4;&#x308B;
---++ Drawing of rotation angle tool.
   * [[%ATTACHURLPATH%/rotation-labels-1.pdf][rotation-labels-1.pdf]]: rotation-labels-1.pdf

---++ Central store
   * [[%ATTACHURLPATH%/central_store_time.jpg][central_store_opening_hours.jpg]]

link : <span data-mce-mark="1">https://smb-dep.web.cern.ch/en/Service/Logistic/Stores</span>

---++ Useful Links

*SPS online information* [[https://op-webtools.web.cern.ch/vistar/vistars.php?usr=SPS1]]

Document of SPS-page : <span data-mce-mark="1">https://op-webtools.web.cern.ch/Vistar/Doc/SPS1.pdf</span>

<span data-mce-mark="1">http://vacmon.web.cern.ch/vacmon/TV_SPS.php</span>

*Twiki Pixel !TestBeams* <span data-mce-mark="1">https://twiki.cern.ch/twiki/bin/view/Atlas/ITkPixelTestBeams</span>

*eLogbook* <span data-mce-mark="1">https://op-webtools.web.cern.ch/elogbook/index.php</span>

-- <span data-mce-mark="1">%USERSIG{AtlasjSilicon - 2016-08-16}%</span>
Attachments
Topic attachments
I	Attachment	History	Action	Size	Date	Who
jpg	central_store_time.jpg	r1	manage	692.4 K	2016-08-19 - 23:12	AtlasjSilicon
png	pika.png	r1	manage	668.4 K	2016-08-20 - 12:39	JunkiSuzuki
pdf	powersupply.pdf	r1	manage	321.0 K	2016-08-19 - 12:45	AtlasjSilicon
pdf	rotation-labels-1.pdf	r1	manage	4375.8 K	2016-08-16 - 17:52	AtlasjSilicon
This topic: Main > PlanerPixelTestBeam > ITKPixelGeneralInfo
Topic revision: r28 - 2018-10-01 - AtlasjSilicon